Cd-Rom Identification; Cd-Rom Updating - Alcatel 1850 TSS-320 Technical Handbook

C.5.3 CD-ROM identification
Each CD-ROM is identified:
1) by the following external identifiers, that are printed on the CD-ROM upper surface:
– the name of the "product-release(s)" (and "version" if applicable)
– a writing indicating the language(s),
– the CD-ROM Part Number),
– the CD-ROM edition (usually first edition=01)
2) and, internally, by the list of the source handbooks and documents (P/Ns and editions) by
whose collection and processing the CD-ROM itself has been created.
C.5.4 CD-ROM updating
The list of source handbook/document P/Ns-editions indicated in previous para. C.5.3 point 2), in
association with the CD-ROM's own P/N-edition, is also loaded in the Alcatel-Information-System as a
structured list.
Whenever a new edition of any of such handbooks/documents is released in the Alcatel archive system,
a check in the Alcatel-Information-System is made to identify the list of CD-ROMs that must be updated
to include the new editions of these handbooks/documents.
This causes the planning and creation of a new edition of the CD-ROM.
Updating of CD-ROMs always follows, with a certain delay, the updating of the single handbooks
composing the collection.
Alcatel 1850 TSS-320 Rel. 1.1
256/270 8DG 07734 AAAA Edition 01
Technical Handbook Common
General on Alcatel Customer Documentation