–
Remove all the plastic guides by unscrew the relevant screw and subsequently pull them out from
the mechanical structure (refer to Figure 125. on page 218).
–
Remove the flange (1) by unscrew the relevant screw on the opposite side of the subrack's side wall
as indicated in Figure 126. on page 219.
–
Remove the two fans unit guides (2) by unscrew the relevant screw on the opposite side of the
subrack's side wall as indicated in Figure 126. on page 219.
–
Remove the unit support guide (3) by unscrew the relevant screw on the opposite side of the
subrack's side wall as indicated in Figure 126. on page 219.
–
Remove the fans unit blocking device (4) by unscrew the relevant screw on the opposite side of the
subrack's side wall as indicated in Figure 126. on page 219.
–
Remove the two screws on the opposite side of the subrack's side wall in order to disassemble the
handle (5) as reported in Figure 126. on page 219.
–
Remove the contact springs (6) from the side wall as indicated in Figure 126. on page 219 (refer to
paragraph 7.2.4 on page 223 for info about hazardous parts dismantling).
Alcatel 1850 TSS-320 Rel. 1.1
218/270
8DG 07734 AAAA Edition 01
Figure 125. Plastic guides removing
Technical Handbook Common
Dismantling & Recycling