Optical Safety; Table 4. Hazard Level Classification Of Different Optical Interfaces - Alcatel 1850 TSS-320 Technical Handbook

5.1.1 Optical Safety

5.1.1.1 Optical Safety compliance with European Norms
Compliancy to Optical Safety Norms is declared in that the equipment satisfies standardized Norms:
• EN 60825-1 ed.1994 + A11 ed.1996+A2 ed.2001
• IEC 60825-1 ed.1993 + A2 ed. 2001 (1999)
• EN 60825-2 ed.2000
• IEC 60825-2 ed.2000
5.1.1.2 Hazard Level classification
The HAZARD LEVEL classification of the different optical interfaces is given in Table 4. on page 184.
The hazard level can be assigned in accordance with the requirements of:
– IEC 60825-1 (1998), IEC 60825-2 (2000)
or
– IEC 60825-1 (1998) + Am. 2 (2001) and IEC 60825-2 (2000)

Table 4. Hazard level classification of different optical interfaces

Signal type
STM-1
STM-16
STM-64
CWDM
OPTO TRX 1.25GBE
SFP-ZX
OPTO TRX 1.25GBE
SFP-LX
Alcatel 1850 TSS-320 Rel. 1.1
184/270 8DG 07734 AAAA Edition 01
Acronym
SS-11 S-1.1 (short haul)
SL-11 L-1.1 (long haul)
SL-12 L-1.2 (long haul)
SS-161 S-16.1 (short haul)
SS-161AR S-16.1 Anyrate
SL-161 L-16.1 (long haul)
SL-162 L-16.2 (long haul)
SI-161 I-16.1 (Intra Office)
XI-641 I-64.1
XS-642 S64.2B
S64-2B S64-2B
SS-162C PIN - from 1470 to 1610 nm
SL-162C APD - from 1470 to 1610 nm
1000B 1000B-ZX
1000B 1000B-LX
Optical Interface
Technical Handbook Common
Hazard Level
1
1M
1M
1M
t.b.d.
1M
1M
1
t.b.d.
t.b.d.
t.b.d.
t.b.d.
t.b.d.
1
1
Technical Specification