Alcatel 1850 TSS-320 Technical Handbook page 187

Signal type
OPTO TRX 1.25GBE
SFP-SX
OPTO TRX 10G
BASE F
5.1.1.3 Location type
The equipment shall be installed in "restricted locations" (industrial and commercial premises) or
"controlled locations" (optical cable ducts and switching centers).
5.1.1.4 Incorporated laser sources characteristics
Output optical interfaces data: the wavelength and the maximum optical power at the output connector
of incorporated laser sources is given in the specific Handbooks (refer to Appendix D on page 257).
5.1.1.5 Optical Safety Labelling
The labels reported below are put a plastic bag.
The customer shall affix the label with the highest Hazard level of all the modules equipped on the subrack.
The optical interfaces which have HAZARD LEVEL 1 (see Table 4. on page 184) carry the following
explanatory label:
The optical interfaces which have HAZARD LEVEL 1M (see Table 4. on page 184) and operate at 2
window, carry the following explanatory label (a multilanguage label kit is also provided):
The label is affixed on the fibre protection cover of the following ports:
• STM-1 PORT with L-1.1 interface (P4E4N, P4S1N units or A2S1 adapter - affixed by the
customer)
• STM-4 PORT with L-4.1 interface
• STM-16 PORT with L-16.1 interface
The optical interfaces which have HAZARD LEVEL 1M and operate at 3
184), carry the following explanatory label (a multilanguage label kit is also provided):
Technical Handbook Common
Technical Specification
Acronym
1000B 1000B-SX
10G 10G BASE F
Optical Interface
window (see Table 4. on page
rd
Alcatel 1850 TSS-320 Rel. 1.1
8DG 07734 AAAA Edition 01
Hazard Level
1
t.b.d.
nd
185/270