7.2 How to disassembly equipment
This equipment is designed for easy disassembly, by using screws and rivets for mechanical assembly
of subracks and modules. The variety of screw types is minimized.
Tools necessary for subrack and units disassembly are reported in paragraph 7.2.1 on page 213.
The disassembly process depends on the respective recycling methods and can be derived from the
delivered assembly instructions of the product.
These guidelines are not mandatory.
They are given in order to optimize the disassembling process and material recovery as whole.
Alcatel 1850 TSS-320 Rel. 1.1
212/270
8DG 07734 AAAA Edition 01
Technical Handbook Common
Dismantling & Recycling