7.2.1 Tools necessary for disassembly
The following tools are necessary for unit disassembly:
–
# T9 TORX screw driver
–
# T20 TORX screw driver
–
Crosshead screwdriver
–
Wrench #
–
Scissors
–
protection gloves
7.2.2 Subrack disassembly
In Figure 118. on page 213 is shown an example of subrack.
The same rules can be applied to the specific equipment to be dismantled.
In order to disassemble the subrack first remove the boards eventually present, included termination bus.
SUBRACK FRONT VIEW
Procedure:
–
Unscrew all the screws present on rear cover as reported in Figure 119.(dashed lines) on page 214.
–
Remove the rear cover in order to access the subrack Back Panel.
Technical Handbook Common
Dismantling & Recycling
Figure 118. Subrack front and rear view
SUBRACK REAR VIEW
Alcatel 1850 TSS-320 Rel. 1.1
8DG 07734 AAAA Edition 01
213/270