Alcatel internetworking, inc. switch troubleshooting guide (614 pages)
Summary of Contents for Alcatel 1850 TSS-320
Page 1
Alcatel 1850 TSS-320 Rel.1.1 Metro Core Transport Service Switch Turn-On & Commissioning Handbook 8DG 07734 FAAA Edition 01...
Page 2
Status: RELEASED 18 July 2006 All rights reserved. Passing on and copying of this document, use and communication of its contents is not permitted without written authorization from Alcatel. 8DG 07734 FAAA Edition 01...
4.3 Bidir. protected cross-connection: STM-1/STM-4 port and STM-n ports ........66 4.4 Unprot. Bidir. cross-conn.: Concatenated group (VC4-7V) and STM-N port ......67 4.5 Cross-connection between a local and a remote data port ............69 Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Table of contents 8DG 07734 FAAA Ed. 01 1/102...
They do not represent any obligation on the part of ALCATEL. COPYRIGHT NOTIFICATION The technical information of this manual is the property of ALCATEL and must not be copied, reproduced or disclosed to a third party without written consent. TECHNICAL SUPPORT Please contact your Local Alcatel Technical Assistance Center for questions referred to the information contained in this document.
Page 10
The fact of merely reading this handbook and the associated handbooks indicated in “in Technical Handbook (see [2] on page 11.) is considered as not enough. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 8/102 8DG 07734 FAAA Ed.
Moreover, should the screen prints included in the handbook contain the product–release's "version" marking, they are not replaced in the handbooks related to a subsequent version, if the screen contents are unchanged Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Preface 8DG 07734 FAAA Ed. 01 9/102...
(product–release) this handbook refers to. • how to use a PC and the Windows ambient applications History EDITION DATE DESCRIPTIONS July 2006 First officially released edition of this handbook Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 10/102 8DG 07734 FAAA Ed. 01 Preface...
Heat-radiating Mechanical Parts ELECTROMAGNETIC COMPATIBILITY (EMC) ELECTROSTATIC DISCHARGERS (ESD) LABELS AFFIXED TO THE EQUIPMENT GENERAL ON ALCATEL CUSTOMER DOCUMENTATION DISMANTLING & RECYCLING Use the Operator’s Handbooks listed in the Technical Handbook [2] as guides of the Craft Terminal procedures and menu.
Handbook Structure This handbook has been edited according to the Alcatel standardized “drawing-up guides" complying with such suggestion. This handbook is divided into the following main topics as described in the table of contents: It contains or gives the reference about general...
INTRODUCTION The current procedure defines the commissioning modality for the 1850 TSS-320 equipment. Particular attention is given to the fact that each component utilized on the links is tested at the Factory’s Final Acceptance dept. during the system test phase.
The screw tightening torque for fixing the units (and modules, if any and if screw- fastened) into the subrack must be: 2.8 kg x cm (0.28 Newton x m) ± 10 % Exceeding this value may result in screw breaking. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 14/102 8DG 07734 FAAA Ed. 01...
Unit setting options are factory pre-set. To check hardware set-up, following malfunction, proceed as instructed in the specific chapter of the Technical Handbooks. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Initial Turn-On and Setting 8DG 07734 FAAA Ed. 01...
Refer to the Common Operator’s Handbook (see handbooks list of [2] on page 11.). Note 1: FTP Server program installed and running is mandatory for software download. Note 2: in case of a firewall is running on PC, it is required to disable it. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 16/102 8DG 07734 FAAA Ed.
Page 19
Loading procedure with SW package on PC hard disk • Loading procedure with SW package on USB key These procedures are described in the following paragraphs. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Initial Turn-On and Setting 8DG 07734 FAAA Ed. 01 17/102...
Page 20
# key-exit (it is now possible to remove the USB key) # disk-init UMOUNT # reboot It is now possible to start the CT application. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 18/102 8DG 07734 FAAA Ed. 01 Initial Turn-On and Setting...
Page 21
(i.e. SUCCESS). It is now possible to start the CT application. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Initial Turn-On and Setting 8DG 07734 FAAA Ed. 01 19/102...
(FLC) in slots 1 and 20. Switch-ON the Craft Terminal Click on the START MENU at the bottom of the screen ⇒ Select the Alcatel 1320CT to start the application ⇒ √ Wait till the NES window appears Select the NE icon ⇒...
Page 23
From the “Download” menu, select “Units Info” ⇒ select the SW package ⇒ select “Activate” from the “Current State/Action” option and click on “OK”. ⇒ Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Initial Turn-On and Setting 8DG 07734 FAAA Ed. 01 21/102...
Page 24
√ Check the presence of “Alcatel Virtual Network Card for Lower Layers” If not present use this procedure to add the “Alcatel Virtual Network Card for Lower Layers”. From Control Panel window, click on “Add Hardware” and then on “Next”...
Select the new type of card and click on “OK. ⇒ The equipment configuration complies with the units really inserted into the equipment being tested. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Initial Turn-On and Setting 8DG 07734 FAAA Ed. 01 23/102...
(of any type of bit rate): N.B. If standard connections files are present, base their loading on the type of port present slot by slot. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 24/102 8DG 07734 FAAA Ed. 01...
3 Attenuator (VOA) window Digital multimeter See the operator’s handbook. Craft terminal (Personal Computer) It can be supplied by ALCATEL. Tx rate up to 64 Kbit/s contra-directional CCITT Data Tester interface V11 Frequency counter 10 MHz ± 1 Hz Turn-On &...
DATA TERMINAL READY Orange GROUND white/green ring DATA SET READY green REQUEST TO SEND white/brown ring CLEAR TO SEND brown SHELL shield Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 26/102 8DG 07734 FAAA Ed. 01 Test and Measurements...
3.2 Connection points position See the Technical Handbooks for correct views. Figure 1 Common cards connection points position Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 27/102...
On the relevant 10 Gbps XFP modules, providing optical connections to XI-641, XS-642 board, PIM the cards and PIMs on which they are plugged Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 29/102...
3.3 Local Measures list and operating sequence The purpose of local measures is to check the correct operating mode of the equipment units. They are detailed in the following paragraphs here contained. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 30/102 8DG 07734 FAAA Ed.
Single-mode or multi-mode single-fiber splices (I) or (Q), according to the interface type Craft Terminal cable (L) Test Bench: Set up the matrix loop via software. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 33/102...
Figure 3 Test on multi-demultiplexing and AIS for optical tributaries Refer to Table 1 on page 25 for the SFP list and para.4.7 on page 71 for the related technical specifications. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 34/102 8DG 07734 FAAA Ed.
Page 37
Check that the optical power is within the range stated on the table in 4.7on page 71. Disconnect the pattern generator from the STM-1 port input. Check no power on Power Meter. Repeat the test on each optical unit. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 35/102...
Note: If the Booster units are present on STM16/STM 64 ports, the ODF is connected directly on Booster unit. Refer to Table 1 on page 25 for the SFP/XFP list and para.4.7on page 71 for the related technical specifications. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 36/102 8DG 07734 FAAA Ed. 01...
Page 39
Preset the instrument to transmit a signal (based on the type of port used) with the followingrequirements: 155520 Kbit/s Bit rate S1.1, L1.1 L1.2 (see para.4.7on page 71 for details) Code/interface STM-1 optical Type Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 37/102...
Figure 5 GbE transport on VC4-xV test Refer to Table 1on page 25 for the SFP/XFP list and para.4.7on page 71. for the technical specifications. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 38/102 8DG 07734 FAAA Ed. 01...
Page 41
Connect the instrument and check that the alarms (LOS and TSF) disappear. √ The alarm signaling is also displayed in the CT main window, by a red circle on the left of the port. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 39/102...
At the end of link tests it is necessary to come back on all nodes for all the link test presettings removal, if performed, and restore all the node settings according to initial configuration. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 42/102 8DG 07734 FAAA Ed.
(STM-16 and GbE colored ports). The OADM adds and drops a part of the traffic (1, 2 or 4 channels, according to the board type) in both directions. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01...
GbE port (up to 8) B&W SFP N x STM-N and/or GbE B/W signals UNIVERSAL MATRIX B&W ports Figure 10 Back-to-back (HUB) configuration Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 44/102 8DG 07734 FAAA Ed. 01 Test and Measurements...
Page 47
Single-mode or multi-mode single-fibers splices (I) or (Q), according to the interface type Fixed attenuators kit (R) or (S) Cleaning kit for optical fibers (T) Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 45/102...
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 39 Error Detector 4P2G5SO PIM1GE Figure 11 Local test in Line Terminal configuration Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 46/102 8DG 07734 FAAA Ed. 01 Test and Measurements...
Page 49
11) Connect each fiber to the related port/SFP, Rx side 12) Test the BER at a given bit rate, checking no errors for 5 minutes. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01...
OADM configuration. Only the added and dropped channels have to be checked. If present, the pass-through channels will be tested in link test (End-to-end), described in next para.3.3.4.4. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 48/102 8DG 07734 FAAA Ed. 01...
Figure 14 End-to-end stability test example 5) After having checked all the channels, by CT check that all the ports under stability test don’t have any alarm. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 49/102...
Check that no errors are read on the Error Detector. Open one of the Optical loop present on the ODF. √ Check after a transient condition that no errors are read by the Error Detector. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 50/102 8DG 07734 FAAA Ed. 01...
Remove the MASTER matrix (in slot 10) and insert it again; after a brief transient, check that no errors are read. If the protection was preset as “revertible”, all connections will switch back to the “Master” matrix. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 51/102...
Page 55
The selected port appears in the “Synchronisation” view. The Hold-Over state is possible only if the other Reference Clock has been present for at least 30 minutes Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 53/102...
Page 56
In “Input Quality Configuration” field, select one of the listed options, then select the “Priority” ⇒ and click on “OK”. √ The selected port appears in the “Synchronization” view. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 54/102 8DG 07734 FAAA Ed. 01 Test and Measurements...
Optical port used like "line port" Figure 17 Remote alarms check N.B. Check for alarms also on the EQUICO front panel (see 4.8- on page74). Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 55/102...
LAPD protocol based on the line interfaces implemented (see 4.10 on page 76) • the NE local address NSAP (see 4.11 on page 77) • the OS address (see 4.12 on page 78) Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 57/102...
Note: Rx power must be calculated on plant data. (PTx – Theoretical line attenuation based on Customer data). Repeat the check on the other port with “Line port” function. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 58/102 8DG 07734 FAAA Ed. 01...
C.T. VARIABLE ATTENUATOR RADIOMETER RX line cable ERROR DETECTOR PATTERN GENERATOR Figure 18 Optical “line port” link margin Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01 59/102...
Page 62
The difference between the Rx optical power (see para.3.4.1 on page 58) and the Rx optical power when introducing attenuation (as above explain) is the “link margin”. Repeat the check on the other port with “Line port” function. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 60/102 8DG 07734 FAAA Ed.
After a certain period of time check that no errors are read on the Error Detector. Repeat the check on the other port with the 1850TSS “Line port” function. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test and Measurements 8DG 07734 FAAA Ed. 01...
√ After a certain period of time check that no errors are read on the Error Detector. Repeat the check on the other port with the 1850TSS “Line port” function. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 62/102 8DG 07734 FAAA Ed. 01...
This chapter contains details lists of procedures step typically created with craft terminal configurations. Furthermore contains characteristics and parameters values. These details are always referred from the previous chapters. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Connections, Configurations and Characteristics 8DG 07734 FAAA Ed. 01 63/102...
Management” and click on “Search”. All the cross-connections made will be displayed. To delete a connection click on the “Cross Connections List” line and select “Delete”. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 64/102 8DG 07734 FAAA Ed. 01...
Select the AU4 port #n and click on “OK”; ⇒ Click on “Select” relevant to the “Output ” field of the Main Cross-Connection window. Select slot wanted. ⇒ Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Connections, Configurations and Characteristics 8DG 07734 FAAA Ed. 01 65/102...
√ Check that the symbol of the bidirectional protected cross-connection is present (the main is a dashed line, the protecting is a dotted line). Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 66/102 8DG 07734 FAAA Ed. 01 Connections, Configurations and Characteristics...
Select the “Output” AU4 and press “OK”. ⇒ √ The “Main Cross Connection” window is displayed. The selected AU4 is inserted in the output box. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Connections, Configurations and Characteristics 8DG 07734 FAAA Ed. 01 67/102...
Page 70
To delete a connection, click on the “Cross Connections List” line and select “Delete”. To delete a cross-connection it is mandatory to have previously deactivated the Virtual Concatenation (VC4-xV). Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 68/102 8DG 07734 FAAA Ed. 01...
Select “Connection type” = “Bidirectional” and click on “Apply”. √ In “History” field, the performed Cross Connection is described. Click on “Close”. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Connections, Configurations and Characteristics 8DG 07734 FAAA Ed. 01 69/102...
Set ALS function - ALS Enabled and click on Apply Check ALS status √ Check in the message area port view that the message “ALS current state Active” is present. Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 70/102 8DG 07734 FAAA Ed. 01...
“User”, the other must be configured as “Network”. button “Apply” executes the configuration variation of the data viewed on the page. button “Close” closes the window. Figure 21 LAPD configuration window Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 76/102 8DG 07734 FAAA Ed. 01...
The graphic objects of the “Spare OS Address” section are as those of the “Local Configuration” window. • Botton “OK” closes the window. Figure 23 OS configuration window Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 78/102 8DG 07734 FAAA Ed. 01 Connections, Configurations and Characteristics...
1.3 dB 2.0 dB aggregate (CWDM Line OUT) signal OSC channel (1311nm) Dropped from the aggregate 1.5 dB (CWDM Line OUT) signal Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Connections, Configurations and Characteristics 8DG 07734 FAAA Ed. 01 79/102...
1.5 dB 1.7 dB aggregate (CWDM Line OUT) signal OSC channel (1311nm) Dropped from the aggregate 1.5 dB (CWDM Line OUT) signal Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 80/102 8DG 07734 FAAA Ed. 01 Connections, Configurations and Characteristics...
2.2 dB 2.9 dB aggregate (CWDM Line OUT) signal OSC channel (1311nm) Dropped from the aggregate 1.5 dB (CWDM Line OUT) signal Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Connections, Configurations and Characteristics 8DG 07734 FAAA Ed. 01 81/102...
14 dB 14 dB wavelength in –6 / +8 range) OSC channel (1311nm) Dropped from the aggregate 1.5 dB (CWDM Line IN) signal Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 82/102 8DG 07734 FAAA Ed. 01 Connections, Configurations and Characteristics...
OSC channel (1311nm) Dropped from the aggregate 1.5 dB (CWDM Line IN) signal Channel passband at –0.5dB (include channel centre 14 dB wavelength in –6 / +8 range) Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Connections, Configurations and Characteristics 8DG 07734 FAAA Ed. 01 83/102...
Ch1 Dropped from the aggregate (CWDM Line IN) signal 2.1 dB OSC channel (1311nm) Dropped from the aggregate 1.5 dB (CWDM Line IN) signal Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 84/102 8DG 07734 FAAA Ed. 01 Connections, Configurations and Characteristics...
TEST REPORT SHEET MODULES ON-SITE 1850 TSS-320 FINAL TEST SITE EQUIPMENT TYPE EQUIPMENT RELEASE SUBRACK Serial Number Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test Report Sheet modules 8DG 07734 FAAA Ed. 01 85/102...
Page 89
ON-SITE 1850 TSS-320 FINAL TEST : SDH LOCAL MEASUREMENTS Expected Value and Measured Measure U.M. Value Tolerance 2048 +-4.6 ppm Free-running frequency check Port Port type/ Interf. SDH Optical ports test slot type PTx power test See para.4.7 A.L.S. check...
Page 90
ON-SITE 1850 TSS-320 FINAL TEST : DATA LOCAL MEASUREMENTS Expected Value and Measured Measure U.M. Value Tolerance Port Port type/ Interf. DATA Optical ports test slot type Alarms. check Check Test error-free data transit 0 errors errors Alarms. check Check...
Page 91
ON-SITE 1850 TSS-320 FINAL TEST : WDM LOCAL MEASUREMENTS Expected Value and Measured Measure U.M. Value Tolerance Port N./ Port type/ Interf. WDM Optical ports test wavel. slot type PTx power test (on colored See para.4.7 SFP output) PTx power test (on colored See para.4.7...
Page 92
ON-SITE 1850 TSS-320 FINAL TEST : WDM LINK MEASUREMENTS Expected Value Measured Measure U.M. Value and Tolerance Port N./ Port type/ Interf. WDM Optical ports test wavel. slot type Line signal output power – See para.4.13 (ODF) Span loss BOL (Customer power budget) Line signal input power –...
Page 94
0 Errors errors Point to point error monitoring check (*) Annex are relevant to the Field Test commissioning procedure (same Part Number). Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 92/102 8DG 07734 FAAA Ed. 01 Test Report Sheet modules...
Page 95
PTx output MUX East PTx output OAD2 East PTx output WDM WLA East PTx output 4xANY Note: for the optical characteristics refer to Commissioning manual. Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Test Report Sheet modules 8DG 07734 FAAA 01 93/102...
Page 96
Note: for the optical characteristics refer to Commissioning manual. Note: Stability Test End-to-End Reference test Regular Stability Test 12 h Stability Test 10 minutes per Gbit Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 94/102 8DG 07734 FAAA Ed. 01 Test Report Sheet modules...
Outgoing Parallel Contacts Central Processing Unit (referred to Controller equipment unit or Microprocessor) Direct Current Data Communication Channel Data Circuit Terminating Equipment DPLL Digital Phase Locked Loop Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Abbreviations 8DG 07734 FAAA Ed. 01 95/102...
Page 98
International Telecommunication Union-Telecommunication Sector ITU-T (*) Local Area Network Command for ALS LDSSHUT Light Emitting Diode Loss Of Frame(alignment) Low Order Interface Loss Of Multiframe Loss Of Pointer Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 96/102 8DG 07734 FAAA Ed. 01 Abbreviations...
Page 99
Remote Error Indication Reference Release Remote Inventory BUS RIBUS Not Urgent Alarm command. Lights up the relative rack red LED RNURG Regenerator Section Overhead RSOH Turn-On & Commissioning Handbook Alcatel 1850 TSS-320 Rel.1.1 Abbreviations 8DG 07734 FAAA Ed. 01 97/102...
CD-ROM, saving, filling and sending it by e-mail to your Local Alcatel Technical Assistance Center. • creating a dedicated form on paper or file and sending it to your Local Alcatel Technical Assistance Center. We’ll take into account of your suggestion.
Page 104
Which subject to deepen: How to deepen: Subject to eliminate or reduce: Other comments/suggestions: Error identified Reader Info Name: Date; Company: Job: Address: E-mail: Phone: Fax: Alcatel 1850 TSS-320 Rel.1.1 Turn-On & Commissioning Handbook 102/102 8DG 07734 FAAA Ed. 01 Customer Documentation Feedback...
Page 106
All rights reserved. Passing on and copying of this document, use and communication of its contents is not permitted without written authorization from Alcatel.
Page 107
THIS PAGE MUST NOT BE INCLUDED IN THE HANDBOOK ASSEMBLY INSTRUCTIONS Total Pages: 102 + 6 NOTES: COVER LABELS (according to Alcatel Italy binder format) Alcatel 1850 TSS-320 Rel.1.1 Metro Core Transport Service Switch Turn-On & Commissioning Handbook 8DG 07734 FAAA Ed. 01 Alcatel 1850 TSS-320 Rel.1.1 -...
Page 108
THIS PAGE MUST NOT BE INCLUDED IN THE HANDBOOK HANDBOOK EDITORIAL INFORMATION Turn-On & Commissioning Handbook Metro Core Transport Service Switch Alcatel 1850 TSS-320 Rel.1.1 Ed. 01 RELEASED Change note: Not applicable 8DG 07734 FAAA Unit: FCG OND OMSN Vimercate 18 July 2006 Author: C.Gianni...