Page 1
Alcatel 1850 TSS-320 Rel. 1.1 Metro Core Transport Service Switch Technical Handbook Common 8DG 07734 AAAA Edition 01...
Page 2
Status: RELEASED 20 July 2006 All rights reserved. Passing on and copying of this document, use and communication of its contents is not permitted without written authorization from Alcatel. 8DG 07734 AAAA Edition 01...
1.2 Insertion of the equipment into the network ..............2 PHYSICAL CONFIGURATION ....................2.1 Subrack overview ........................ 2.2 Equipment front view ......................2.2.1 1850 TSS-320 Shelf front view ..................2.2.2 Examples of Shelf Configuration ..................2.3 Part list..........................2.4 Units front view ........................
Page 4
5.7.2 Waste from Electrical and Electronic Equipment (WEEE) ..........194 5.7.3 Acoustical noise ......................194 5.7.4 Climatic for operating conditions..................195 5.7.5 Storage ........................... 197 5.7.6 Transportation......................... 199 Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 2/270 8DG 07734 AAAA Edition 01 Table of Contents...
Page 5
A.4 Electrostatic Dischargers (ESD) ..................239 A.5 Suggestions, notes and cautions ..................240 APPENDIX B LABELS AFFIXED TO THE EQUIPMENT............... 241 APPENDIX C GENERAL ON ALCATEL CUSTOMER DOCUMENTATION........253 C.1 Products, product–releases, versions and Customer Documentation ......253 C.2 Handbook supply to Customers ..................253 C.3 Aims of standard Customer Documentation ..............
Page 6
Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 4/270 8DG 07734 AAAA Edition 01 Table of Contents...
Figure 9. Allocation of specialized slots .................... Figure 10. 1850 TSS-320: Side view of (N) card and (H) cards 4.5TE wide along with slot adapter Figure 11. 1850 TSS-320: Side view of normal card along with the specific slot adapter....
Page 8
Figure 103. EC320 Block diagram ....................161 Figure 104. ISPB bus connections....................163 Figure 105. Control LAN Sub-system ....................164 Figure 106. MT320: Control sub-system block diagram ..............165 Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 6/270 8DG 07734 AAAA Edition 01...
Table 11. Handbooks related to the specific product hardware ............258 Table 12. Handbooks related to the local product SW management ..........259 Table 13. Handbooks common to 1850 TSS-320 ................259 Table 14. Documentation on CD-ROM ..................... 260 Technical Handbook Common Alcatel 1850 TSS-320 Rel.
Page 12
Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 10/270 8DG 07734 AAAA Edition 01 List of Tables...
Preliminary Information WARNING ALCATEL makes no warranty of any kind with regards to this manual, and specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. ALCATEL will not be liable for errors contained herein or for damages, whether direct, indirect, consequential, incidental, or special, in connection with the furnishing, performance, or use of this material.
Page 14
The fact of merely reading this handbook and the associated handbooks indicated in Appendix D on page 257 is considered as not enough. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 12/270 8DG 07734 AAAA Edition 01...
First validated and officially released issued of this Handbook Related Documents Refer to Appendix D on page 257 in order to have the list and description of the full Customer Documentation set. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Preface 8DG 07734 AAAA Edition 01 13/270...
It contains info regarding customer opinions collection FEEDBACK about this documentation General Information on Documentation Refer to Appendix C on page 253 in order to have information about of Alcatel Customer Documentation organization. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common...
TDM and data services calls for platforms capable to manage several technologies at the same time. The new 1850 TSS-320 (Transport Service Switch) works around the UNIVERSAL MATRIX concept integrating in a single chip several network (matrix) layers (i.e. from ODU to Sonet/SDH to packets).
– IETF RFC3031 (MPLS) – ATM Forum (ATM) Besides the electrical matrix, a full optical λ switch will be also possible. According to the provided description this is the overall (generic) scheme of 1850 TSS-320 MSTP: Server Server Server Client...
Page 20
1850 TSS-320 node Main characteristics are: – Multi-Service integration (SDH/Sonet, Data, WDM and PDH) • SDH/Sonet and PDH ports performing the payload processing functions; optical access on the front face of the port cards, electrical accesses provided on a dedicated access panel;...
1.2 Insertion of the equipment into the network The 1850 TSS-320 equipment belongs to the “1850TSS family” (refer to Figure 4.) made up by five Multiservice system (subrack) based on different sizes of the UNIVERSAL MATRIX. – “CPE” size system (15 G switching capacity) –...
1 Gbps link: GE /OC/S T M 2.5 Gbps link: OC/S T M 10 Gbps link: GE /OC/S T M 1850 TS S -320 Figure 5. 1850 TSS-320: insertion of the equipment into the network Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 20/270...
For the units front view refer to para 2.4 on page 43. N.B. The Personal Computer (Craft Terminal) utilized for Initial Turn-on and Maintenance operations is not listed as an item of the equipment, but it can be supplied by Alcatel. See Operator's Handbook for PC hardware configuration. 2.1 Subrack overview The main drivers guiding the mechanical design are summarized by the following statements: –...
Figure 7. 1850 TSS-320: front cover plate The basic shelf is partitioned among the following slot types as shown in Figure 8.: Port slots : 4,5TE wide The port slot is compatible with "full", "half", "normal" & "small" card sizes. Port slots are compatible as well with "Double full"...
1+N protected) 1+N protected) W DM area for legacy W DM area for legacy boards reuse boards reuse Figure 9. Allocation of specialized slots Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 24/270 8DG 07734 AAAA Edition 01 Physical Configuration...
FAN UNIT FAN UNIT FAN UNIT FAN UNIT Figure 10. 1850 TSS-320: Side view of (N) card and (H) cards 4.5TE wide along with slot adapter Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Physical Configuration 8DG 07734 AAAA Edition 01...
FAN UNIT FAN UNIT Figure 11. 1850 TSS-320: Side view of normal card along with the specific slot adapter The shelf can be partitioned in up to 32 Port slots (achieved exploiting slot adapters) plus 7 slots for common parts (43 slots in total) organized as follow: 2x7TE Matrix (MT320) slots (a total of 14TE) dedicated to matrix boards (copy A and copy B for redundancy).
Page 29
– The third part is reserved to the unprotected Service functions(SERV320) providing EOW and AUX channels. Not available in current release Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Physical Configuration 8DG 07734 AAAA Edition 01 27/270...
2.2 Equipment front view 1850 TSS-320 is composed of one shelf containing 43 slots as indicated in Figure 12. on page 28. From Figure 13. on page 29 to Figure 15. on page 30, examples of shelf configuration will be given.
Access shelf interconnection panel Upper Fan Tray not available in current release Lower Fan Tray Figure 13. 1850 TSS-320: shelf equipped with 20G Packet Processor “PP20G” boards Access shelf interconnection panel Upper Fan Tray Note: PDH and LOA boards are not available...
Access shelf interconnection panel Upper Fan Tray not available in current release Lower Fan Tray Figure 15. 1850 TSS-320: shelf equipped with STM-N boards Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 30/270 8DG 07734 AAAA Edition 01 Physical Configuration...
Position (Slot) of the unit inside the equipment. Refer to Figure 12.at page 28 for slot numbering. • Number of explanatory “Notes” Table 3.on page 42 reports all the explanatory notes. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Physical Configuration 8DG 07734 AAAA Edition 01 31/270...
Only Electrical connector is supplied. Related coax cable has to be ordered separately Unit measure is “meters”. In the PO has to be clarified the needed length in meters. Only if direct shipment is not provided. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 42/270...
More in details: Paragraph 2.4.1 on page 44 show the “Common parts front view” Paragraph 2.4.2 on page 49 show the “Equipment accessories” Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Physical Configuration 8DG 07734 AAAA Edition 01 43/270...
Green led - in service unit (2) WARNING LABEL: moving mechanical parts (3) WARNING LABEL: windage (air sunction) Figure 17. NG FAN UNIT front view (FAN320) Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Physical Configuration 8DG 07734 AAAA Edition 01 45/270...
AMBER: card In Service Battery OFF RED: Card Fail RED BLINK: Card Misconfigured or Card Mismatch Figure 18. POWER SUPPLY FILTER front view (POW320) Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 46/270 8DG 07734 AAAA Edition 01 Physical Configuration...
LED OFF: no link (16) (19) YELLOW LED ON: full duplex YELLOW LED OFF: half duplex YELLOW LED BLINKING: collision Figure 20. 1850 TSS-320 UNIVERSAL MATRIX front view (MT320) Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 48/270 8DG 07734 AAAA Edition 01...
3 FUNCTIONAL DESCRIPTION 3.1 General description Figure 25. illustrates in block diagram form the units types employed in 1850 TSS-320 and the general operating functions. – “EC320” card The unit provides the following functionality: – First Level Controller(FLC) + HD (Hard Disk) function –...
Page 56
– Logical/Physical Packet Transport adaptation – 10G Packet Processor – Traffic Manager – MAC termination – TCAM and Local processor – UNIVERSAL MATRIX interfaces Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 54/270 8DG 07734 AAAA Edition 01 Functional Description...
Page 57
UNIT and the backplane in order to supply all the boards of the subrack; It also provides a 2 MHz/ 2Mbi/s Input/Output interface suitable for synchronization purpose. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
2Mhz/2Mb VccA/VccB T3/T6 VccB LO SWITCH DC/DC -VbattB * Not available in current release POWER B CONTROL Figure 25. 1850 TSS-320 general block diagram Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 56/270 8DG 07734 AAAA Edition 01 Functional Description...
Page 59
Auxiliary sub-system (see paragraph 3.8 on page 140) Power supply sub-system (see paragraph 3.9 on page 142) On the following paragraphs a detailed description of each sub-system is given. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 57/270...
– ITU-T G.959.1 Optical Transport Network (OTN) physical layer interfaces. The overall functional architecture for traffic management of 1850 TSS-320 node is depicted in Figure 26. on page 59. The system is based upon a payload switching element which combines both TDM and packet switching capabilities.
UNIVERSAL MATRIX after before before after before before E1, T1, E3, T3 proc proc proc demap proc demap Figure 27. SDH payload functional architecture Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 60/270 8DG 07734 AAAA Edition 01 Functional Description...
See section 3.3 on page 70 for the description of the SDH lower order switching capacity of the system. Lower order payload processing (LOA: Lower Order Adaptation functionality) is performed in dedicated LOA cards, with 10G equivalent throughput each. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 61/270...
Functions used for intrashelf Functions used for intrashelf connections connections UNIVERSAL MATRIX Used for HO aggregation Figure 30. SDH PDH mapping subsystem Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 63/270...
3.2.2 Data transmission architecture This section describes the capabilities of the 1850 TSS-320 equipment to manage packet based traffic. Pure packet based traffic and interworking between TDM and packets are as well managed. The overall functional architecture for packet based traffic management is reported in Figure 31. on page...
HO tributaries are terminated and the LO containers are recovered, then the LO path OH is managed as foreseen by SDH standards. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
Functions used for intrashelf Functions used for intrashelf connections connections UNIVERSAL MATRIX Used for HO aggregation Figure 34. Data Mapping over SDH Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 66/270 8DG 07734 AAAA Edition 01 Functional Description...
3.2.3 CWDM transmission architecture The WDM system of the 1850 TSS-320 equipment (CWDM in current release), allows the following basic configurations: – Line Terminal (LT) – Optical Add and Drop Multiplexer (OADM) – Back-to-back terminal (Hub). In the following Figure 35.: –...
3.2.3.1 Line Terminal In Line Terminal configuration, the CWDM system of the Alcatel 1850 TSS-320 equipment connects up to 8 colored optical signals (STM-16/OC-48, 1GbE) to an optical fibre CWDM line. In Line Terminal configuration, the equipment takes places at both ends of point-to-point links.
(up to 8) is a CADM board n (up to 8) added and dropped channels (B&W User signals) Figure 38. Back-to-back terminal (Hub) configuration Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 69/270...
The functional block diagram of a generic port board of 1850 TSS-320 equipment is reported in Figure 39. on page 71 with its corresponding atomic function representation.
Page 74
RS data communication (DCCR) insertion • Regenerator Section Layer Adaptation to Multiplex Section Layer: RSn/MSn_A RSn/MSn_A_Sk TSF detection SSF insertion (on TSF detection) RSn/MSn_A_So no information is inserted Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 72/270 8DG 07734 AAAA Edition 01 Functional Description...
Page 75
SSF insertion (on LOP and AU-AIS detection) MSn/Sn_A_So AUG assembly and byte interleaving AU-3/4 Pointer generator AU-AIS generator PJE (Pointer Justification Events) generated count (SDH only) Path Layer Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 73/270...
Page 76
FAS (Frame Alignment Signal) in frames 1 to 8. trace identifier in frames 9 to 72. TC RDI and ODI in frames 73 to 76. N1[1-4]: BIP-8 calculation and insertion. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 74/270 8DG 07734 AAAA Edition 01...
Page 77
F2, F3: path user channel extraction – Path Protection Sub-layer Termination: SnP_TT SnP_TT_Sk SSF detection TSF insertion (on SSF detection) SnP_TT_So no information is inserted Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 75/270...
• 1+1 protected by means of linear MSP protection • 1:N protected by means of linear MSP protection • protected by means of MS-SPRING Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 76/270 8DG 07734 AAAA Edition 01 Functional Description...
Page 79
HVC functions. It has to be noted that no payload processing is performed by "virtual image" functions. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
After processing, the LO tributaries are carried to the LPC connection function for cross connection: this is obtained by means of a dedicated backplane in band signalling. The generic LOA board 1850 TSS-320 is depicted in Figure 42. on page 79 with its corresponding atomic functions representation, fully compliant with G.783 functional model.
Page 82
The REI information is recovered. V5[8]: Path Status monitoring detection. V5[5-7]: Signal Label Monitoring --> UNEQ and VC-AIS detection. V5[1-2]: VC-m BIP-2 Errored Block Count. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 80/270 8DG 07734 AAAA Edition 01 Functional Description...
Page 83
9 to 72. TC RDI and ODI in frames 73 to 76. N2[1-2]: BIP-2 calculation and insertion. V5[1-2]: BIP-2 compensation Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 81/270...
Page 84
K4[5-7]: optional use of enhanced-RDI (E-RDI) • Path Sub-layer protection function: For VC-3 LO tributaries (m=3), refer to Sub layer protection functions described in section 3.4.1.1 on page 71. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 82/270 8DG 07734 AAAA Edition 01 Functional Description...
VC3 XC Sonet PORT CARD Sonet PORT CARD OC - N UNIVERSAL MATRIX Used for HO VC3 XC Figure 43. LOA utilization for AU3/TU3 conversion. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 83/270...
Type of connection (unprotected, 1+1 protected by means of SNCP/I, SNCP/N, SNCP/ S protection). Note:SNCP/N, SNCP/S protection are not operative in current release. – Traffic direction (unidirectional, bi-directional). – Input and output connection points. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 84/270 8DG 07734 AAAA Edition 01 Functional Description...
Plesiochronous Physical layer Note that q = 4,3. • Physical Trail Termination (PPI): Eq_TT Eq_TT_Sk Electrical signal recovery LOS detection Eq_TT_So Generation of the electrical signal Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 85/270...
Page 88
VC-4 Tandem Connection Trail Termination: SnD_TT As described in section 3.4.1.1 on page 71. • VC-4 Tandem Connection Adaptation: SnD_A As described in section 3.4.1.1 on page 71. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 86/270 8DG 07734 AAAA Edition 01 Functional Description...
Figure 47. 16XGE PACKET MODULE block diagram ETY Sk Recovers data from line encoded signal detects LOS ETY So Condition data for line transmission ALS management Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 89/270...
Ethernet port port port port Logical Packet 16G E PACKET MO DULE 16G E PACKET MO DULE Switch Figure 48. Packet Processor block diagram Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 90/270 8DG 07734 AAAA Edition 01 Functional Description...
Page 93
ETS to Provider bridge adaptation ETS to provider Bridge adaptation Counting on flow base MAC Learning Forwarding on MAC DA and SVLAN Metering on SVLAN base Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 91/270...
Page 94
Multicasting at board level (tbc) Traffic manager So Output scheduling Output shaping Multicasting at port or tunnel level (tbc) Back-pressure Sk from Data Mapper and MAC Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 92/270 8DG 07734 AAAA Edition 01 Functional Description...
Traffic manager Sk See section 3.4.5.1 on page 89 for detailed process description. Traffic manager So See section 3.4.5.1 on page 89 for detailed process description. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 93/270...
GFP encapsulation, while IP/MPLS traffic can be mapped over HDLC (via POS encapsulation). Encapsulated traffic is then mapped into virtually or contiguously concatenated technology specific virtual containers (e.g virtually or contiguously concatenated HO VC-4/3, virtually concatenated LO VC3/12/11). Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 94/270...
3.4.2.1 on page 79 LO path termination is provided by LOA card as described in section 3.4.4.2 on page 87: data card provides a simplified VC Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 95/270...
Page 98
VCG management characteristics as defined in demapper functionality. Mapping of GFP/LAPS/HDLC frames into the specific transport technology (SDH). Depending on the transported packet traffic different functionalities are provided: Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 96/270...
3.5 Controller sub-system The 1850 TSS-320 Network Element is organized on a two level control architecture. (see Figure 54.on page 99) FLC A FLC B FLC A FLC B SLC A SLC B SLC A SLC B Redundant LAN for...
Fast Ethernet interfaces for communication between the equipment controller and the management systems. In addition to the previous interfaces the 1850 TSS-320 implements several HW interfaces for internal functions like, for instance: remote inventory reading, FPGA download and activation. A key concept applied to the control architecture of 1850 TSS-320 is redundancy.
Redundancy of the controller itself, supported both by dedicated HW and SW • Management of Housekeeping I/O, Remote Alarms and Rack Lamps via dedicated HW and Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 101/270...
Remote Craft Terminal or remote Management System. Craft terminal access is implemented using both USB 2.0 and F interfaces. Connectors for both interfaces are located on front of the Equipment Controller board (EC320). Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 102/270...
Page 105
HouseKeeping and Rack Lamps (connector on front) • DBG interface (connector on front) • LAN interface (to backplane) • ISC interface • SPI_LCI interface (covers old LCI interface) Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 103/270...
This link is used to ensure that independently from local bus conditions, the two SLCs can have dedicated bandwidth for performance of critical tasks. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 104/270...
PSF units located in the electronic shelf. The presence of the PSF/PSU units is directly perceived by Falco4G with dedicated wires. Falco4G de-serializes the information and provides access to the data via PCI interface. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 105/270...
The two ports are directly connected to a 5 ports LAN switch. This LAN switch is also connected to the LAN exported by PQ2/MC2E module assuring connection among LDC microprocessor and all the other microprocessors resident in the electronic shelf. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 107/270...
Page 110
For this reason both LDC and SLCs must have access to the LEDs of the data board. The access is provided via spider B. Data Board Interfaces: • ISPB R2C interface • LAN interface (internal) • DBG interface • ISC interface Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 108/270 8DG 07734 AAAA Edition 01 Functional Description...
F interface: toward CT – Qaux interface: proprietary for management – DBG interface: for debug – USB interface: For system recovery and security and other Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 109/270...
Housekeeping functionality (inputs and outputs) is provided by the active FLC board. The FLC board shall drive 8 separate inputs for fault conditions arising externally to the NE. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 110/270 8DG 07734 AAAA Edition 01...
Page 113
A fault of the LDC microprocessor, will have as consequence the loss of PM data that were not yet communicated to the FLC Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 111/270...
3.6 Protection sub-system The types of protections are: • Equipment protection (EPS) The EPS protection is supported on the 1850 TSS-320 equipment for the following cards: Equipment Boards Protection Number of protection Mode Scheme schemes UNIVERSAL MATRIX Not revertive (MT320)
When the path is no longer available, an AIS signal is transmitted on the same path to activate protection. In this manner SNCP can protect the paths following cable break-down or failures along the fiber and nodes. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 114/270...
MAIN SPARE Switch on spare path Unidirectional failure Case of unidirectional failure between nodes 5 and 1 Figure 64. Failure examples in SNCP ring Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 116/270 8DG 07734 AAAA Edition 01 Functional Description...
For further information refer to Figure 65.on page 118 which shows the D/C-A INS-A configuration and Figure 66. on page 118 which shows the D/C-A INS-B configuration. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
1 -> 5 -> 4 -> 10 -> 9 -> 8. The operative switch is on node 8 and the previous pass- through between nodes 4 and 3 is no more used. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common...
Port 3 Port 3 Port 3 Port 1 Port 1 Port 2 Port 2 D/CA INSA D/CB INSB SNCP ring Figure 67. Drop and Continue Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 119/270...
SNCP ring Figure 68. Drop and Continue - 1st failure SNCP ring SNCP ring switched Figure 69. Drop and Continue - 2nd failure Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 120/270 8DG 07734 AAAA Edition 01 Functional Description...
Hardware reduction; as a matter of fact four nodes are collapsed in one node. SNCP ring Port 1 Port 2 Port 4 Port 3 SNCP ring Figure 70. Collapsed single node ring interconnection Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 121/270...
SNCP ring Port 1 Port 2 switched Port 4 Port 3 SNCP ring Figure 71. Collapsed single node ring interconnection -1st failure Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 122/270 8DG 07734 AAAA Edition 01 Functional Description...
SNCP ring Port 1 Port 2 Port 4 Port 3 SNCP ring switched Figure 72. Collapsed single node ring interconnection -2nd failure Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 123/270...
In this release the "low priority" connection are not managed. The MS SPRING algorithm starts as a consequence of the following Section alarms: • LOS, LOF, MS AIS, EXBER (B2), SIGNAL DEGRADE (B2) Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 124/270 8DG 07734 AAAA Edition 01...
B working capacity as a source, are replaced by connections having the incoming A protection traffic as a source. The signals maintain the same end point connection. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
BEFORE AFTER Figure 74. Effect of a BRIDGE “B side" operation protection working BEFORE AFTER Figure 75. Effect of a BRIDGE “A side" operation Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 126/270 8DG 07734 AAAA Edition 01 Functional Description...
The K1 and K2 are exchanged between the Node that are adjacent to the failure, instead the other Nodes put K1 and K2 in passthrough. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
PROTECTION CHANNELS SIGNAL BRIDGE SWITCH (*) All protection AU4 are put in Pass-through in the 5th and 6th NEs Figure 78. Line break recovering operations Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 128/270 8DG 07734 AAAA Edition 01 Functional Description...
We can obtain from the example that is possible bandwidth re-used for some traffic patterns (AU4-9 protects four connection on AU4-1) having the same protection for some several connections (shared protection). Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 129/270...
B : AU4 2 side B side A side A side B side A side B side A side B Figure 79. 2F MS-SPRING example of operation Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 130/270 8DG 07734 AAAA Edition 01 Functional Description...
B side A side B Node SNCP or MS-SPRING SS = Service Selector Figure 81. MS SPRING Drop and Continue, Insert Continues (protected) Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 132/270 8DG 07734 AAAA Edition 01 Functional Description...
CRG will run in free-running or holdover mode. Furthermore the CRG can provide a redundant output reference clock to an external timing generator as determined by T4/T5 selection process. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 133/270...
T1: STM-N transport signals carry (in addition to the payload) reference timing information and the indication of the quality level of the source generating this timing information, via S1 byte as defined in Rec ITU-T G.707 Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 134/270...
(fix output level for T4 or AIS activation for T5) to prevent transmission of a timing signal failed or having a quality (SSM) worse than a provisioned threshold. This is useful for instance in ADM with SSU configuration. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 135/270...
Page 138
There is always one T0 selection process controlling and keeping aligned SEL_B on SLCCRU daughter board copy A and B; the selection of the internal clock from the active copy is done at port level. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 136/270...
Page 139
SSU is configured as the timing source (T3 or T6) of the highest priority for selection of the timing source for the internal synchronization. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
Clk 38.88Mhz Clk 38.88Mhz plus sync pulse plus sync pulse Clk 38.88Mhz Clk 38.88Mhz plus sync pulse plus sync pulse Figure 85. Clock architecture overview Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 138/270 8DG 07734 AAAA Edition 01 Functional Description...
Page 141
SLCCRU copy is made available to the other copy on a dedicated wires in addition to standard T1/T2, T3/T6 and T4/T5 connections. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01...
The ECC routing functionality is located on both First level controller boards (boards redundancy allows to support the EPS 1+1 configuration). These channels are, then, forwarded by the 'Multi-HDLC Controller' to the internal micro-processor for the actual routing. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 140/270 8DG 07734 AAAA Edition 01...
The configured connectivity interesting the SDH, WDM AUX channels, may be either a cross- connection between Ports or a termination towards one of the 'physical accesses' provided by Service card Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 141/270...
3.9 Power distribution architecture At the top of every rack hosting 1850 TSS-320 shelves it is present, the Top Rack Unit (TRU), that provides power distribution to each shelf within the rack: the overall main battery voltage distribution inside framework depicted in Figure 89. on page 143.
The redundant connection voltages provided by TRU at the subrack interface I2 are connect to the shelf PSF card. The solution presented for PSF is specifically designed for the 1850 TSS-320 node and foresees: – Input filter to reduce the spurious frequencies produced from the DC/DC converters inside the equipment –...
3.6 V B Slot for legacy WDM boards PSF B 5 V B fuse fuse fuse fuse Access pane slots Figure 90. Service power distribution Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 144/270 8DG 07734 AAAA Edition 01 Functional Description...
INTO THE EGRESSING TU-n DUE TO DEFECT BEFORE OR WITHIN THE TANDEM CONNECTION; - RESERVED CAPACITY (FOR FUTURE USE) Figure 92. VC-12 Structure (asynchronous mapping of 2048 Kbit/s) Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 146/270 8DG 07734 AAAA Edition 01...
JUSTIFICATION OPPORTUNITY 125 us 125 us BYTES BELONGING TO THE PREVIOUS TU-12 BYTES BELONGING TO 125 us THE SUBSEQUENT TU-12 Figure 93. TU-12 Structure Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 147/270...
D is a Media Dependent byte: not operative. – bytes marked with ² are not scrambled (like the whole first row). Figure 97. STM-1 structure and SOH byte contents Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 150/270 8DG 07734 AAAA Edition 01...
– bytes marked with ² are not scrambled (like the whole first row). Figure 99. Structure of STM-16 and SOH bytes contents Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 152/270 8DG 07734 AAAA Edition 01...
– bytes marked with S are not scrambled (like the whole first row) Figure 100. STM-64 structure and SOH byte contents Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Functional Description 8DG 07734 AAAA Edition 01 153/270...
PQ3/MC1-B module; the module is a processor providing all the basic hardware components required by the EC processing function: – Microprocessor (CPU). – System memory (Boot Flash EPROM, RAM). Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Unit Descriptions 8DG 07734 AAAA Edition 01 155/270...
The second port is a point-to-point low speed UART-based RS-232 serial channel operating at up to 38400 bit/sec; it is compatible with the operation of the COM port of a PC. The port is accessible through a USB mini-B type on front panel. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 156/270...
Page 159
RL_NURG. The alarm is cleared by software when the root cause previously generating RL_URG or RL_NURG disappears. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Unit Descriptions 8DG 07734 AAAA Edition 01 157/270...
Page 160
Link) with some I/O status signals used for the “active / stand–by” role arbitration process. – LCI interface: this interface consists of an SPI-compatible serial link dedicated to the “Local Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 158/270 8DG 07734 AAAA Edition 01...
Page 161
TRU module. The interface is not controlled by the local EC processor. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Unit Descriptions 8DG 07734 AAAA Edition 01 159/270...
An additional duplicated 3.3VS “service power supply” is received from the back panel: it is used together with the VC3V3 for powering the circuitry related to the SPI bus interface (”Spider” and its slave devices). Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common...
USB2 USB to ATA Type_A HUSB Hard Disk Drive (HDD) Alarms cut-off EC + OAM Function EQUIPMENT CONTROLLER (EC320) Figure 103. EC320 Block diagram Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Unit Descriptions 8DG 07734 AAAA Edition 01 161/270...
– LO matrix: implement LPC (Lower Order Path Connection) switch function and it takes part in protection of LOA units. – Unit Power Supply Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 162/270 8DG 07734 AAAA Edition 01 Unit Descriptions...
104. on page 163). The same device collects the overall Performance Monitoring (PM) data too. Bus Terminations Lower FAN unit Figure 104. ISPB bus connections Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Unit Descriptions 8DG 07734 AAAA Edition 01 163/270...
(“over-voltage and over-current protection” block in Figure 112. on page 174) both on positive line and negative line. Fuses are fitted on each line in order to prevent a failed backpanel from shorting the input bus. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Unit Descriptions 8DG 07734 AAAA Edition 01 171/270...
T3b or T6a, T6b / T4a,T4b or T5a,T5b). In the 1850 TSS-320 equipment, the physical accesses and terminations of the synchronization signals are implemented on the POW320_A and POW320_B units, while the frame processing (significant in case of E1) with SSM management is realized on the MATRIX units (MT320).
The two centralized boards (POW320-A and POW320-B) provide adaptation to the central telecom power bus and the internal system power bus. They work in configuration 1+1. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Unit Descriptions 8DG 07734 AAAA Edition 01...
DC/DC CONVERTER 5.3 V from POW320_B STEP-DOWN 3.3 V CONVERTER to internal circuits DC/DC POW320 CONVERTER Figure 112. Power Supply Filter Unit block diagram Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 174/270 8DG 07734 AAAA Edition 01 Unit Descriptions...
In the 1850 TSS-320 equipment two FAN units are mandatory. The unit can be simply plugged into the backpanel as any other board of the 1850 TSS-320, in one of the two slots present for the purpose, at the top and at the bottom of the shelf.
16.8W of power consumption. With all fans at full speed condition, the board absorbs 0.9A when powered through battery A by a voltage of 65V, i.e. it has a total power consumption of 58.2W. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 176/270...
- Optical bit rate, WDM side: It is the same of client B&W bit rate, in proper wavelength (1470 nm -> 1610 nm, 20 nm spaced) Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Technical Specification 8DG 07734 AAAA Edition 01 179/270...
Page 182
256 x STM-1 optical interfaces; 128 x STM-16 optical interfaces; 32 x STM-64 optical interfaces; 256 x Fast Ethernet interfaces; 256 x GEthernet interfaces; Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 180/270 8DG 07734 AAAA Edition 01 Technical Specification...
Page 184
(Company id, Unit Type, Unit Part Number, Serial Part Number, Software Part Number etc.) For detail refer to Operator Handbook. Security Password, operator profile, back-up for programs and data Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 182/270 8DG 07734 AAAA Edition 01 Technical Specification...
Page 185
Priority and SSM algorithm Protection against lighting surges Not applicable Additional features: VCi Signal Label management Programmable alarms severity J0 - Section Trace Management Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Technical Specification 8DG 07734 AAAA Edition 01 183/270...
PIN - from 1470 to 1610 nm t.b.d. SL-162C APD - from 1470 to 1610 nm t.b.d. OPTO TRX 1.25GBE 1000B 1000B-ZX SFP-ZX OPTO TRX 1.25GBE 1000B 1000B-LX SFP-LX Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 184/270 8DG 07734 AAAA Edition 01 Technical Specification...
Page 187
The optical interfaces which have HAZARD LEVEL 1M and operate at 3 window (see Table 4. on page 184), carry the following explanatory label (a multilanguage label kit is also provided): Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Technical Specification 8DG 07734 AAAA Edition 01 185/270...
The safety instructions for proper assembly, maintenance, and safe use including clear warning concerning precautions to avoid possible exposure to hazardous voltages, are reported in Appendix A.2 and more specifically in appendix. A.2.3.2 on page 231. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 186/270...
0 to 6 dB Return loss w12 dB 51-102 kHz w18 dB 102-2048 kHz w14 dB 2048-3072 kHz Pulse shape See ITU-T Rec. G.703 Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Technical Specification 8DG 07734 AAAA Edition 01 187/270...
Characteristics are given in the relevant Handbook Optical connectors DATA optical characteristics: Types of optical interfaces 1000B-SX, 1000B-LX, 1000B-ZX, 10G-BASE S Characteristics are given in the relevant Handbook Optical connectors Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 188/270 8DG 07734 AAAA Edition 01 Technical Specification...
ETS 300132-2 5.4.1 Power consumption The Alcatel 1850 TSS-320 is designed for low power consumption. Developing new components with very high integration density and low voltage supply leads to a significant reduction of power consumption. Depending on the number and type of I/O ports the power consumption may vary in a wide range.
RA_IND: Indeterminate alarm. It indicates synthesis of alarms not associated to the other severity (from EC320) • RA_ORBATT: fault or loss of one battery station (from POW320) • RA_ANDBATT: loss of both battery station (from POW320) Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 190/270 8DG 07734 AAAA Edition 01 Technical Specification...
Page 193
(Attended); The attended command is also sent to the rack lamps (if present). Trouble-shooting: The 1850 TSS-320 equipment has been designed to dialog with a Personal Computer (PC) in order to service, activate and trouble-shoot the equipment. Trouble-shoot procedure for the equipment and details of the alarms for each card and relevant indications are described in the relevant Handbook.
159 mm High x 22.5 mm Wide 73 mm High x 20 mm Wide Subrack weight 15 Kg Rack cabling Vertical between rack and subrack front access Back-to-back installation Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 192/270 8DG 07734 AAAA Edition 01 Technical Specification...
5.7 Environmental conditions Main environmental aspects of Alcatel products are: – energy consumption during manufacturing and use, – materials harmfulness and recyclability, – emissions to air, water or soil related to the manufacturing and the use of the product, –...
European text is 13th August 2005. All Alcatel products fall under in Category 3 of Annex 1A of the WEEE directive (Directive 2002/96/ EC) i.e. "IT and Telecommunication equipment" under item "other products transmitting sound, images or other information by telecommunications."...
5.7.4 Climatic for operating conditions The Equipment meets the requirements of ETSI Standard with use of fans housed in an external subrack. The functionality of the 1850 TSS-320 Equipment, Vs. Temperature, is in compliance with: ETS 300 019-1-3 :1992 , class 3.2.
5.7.5 Storage The 1850 TSS-320 equipment meet the following requirements Vs. Storage: ETS 300 019-1-1: 1992, class 1.2 Class 1.2: weatherprotected, not temper. controlled storage location. This class applies to weather protected storage having neither temperature nor humidity control. The location may have openings directly to the open air, i.e., it may be only partly weatherproofed.
It also includes transportation by ship and by train specially designed, shock-reducing buffers. Manual loading and unloading of to 20 Kg is included. Extension of extreme low temperature during transportation is permitted for the 1850 TSS-320 equipment in its standard packing: AT -40×...
1120 radiation, heat water from sources other than rain (NOTE 5) 1 (NOTE 7) wetness none conditions of wet surfaces Notes on next page. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 200/270 8DG 07734 AAAA Edition 01 Technical Specification...
Page 203
The figure indicates the velocity of water and not the height of water accumulated. NOTE 6 : Occurrence of condensation. NOTE 7 : For short duration only. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Technical Specification 8DG 07734 AAAA Edition 01 201/270...
The HARDWARE SETTINGS can be executed after having checked all the sub-units belonging to a unit, and by using the presetting indication presented in this chapter. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Hardware Settings 8DG 07734 AAAA Edition 01...
SUFFIX and ICS must be meant as: • from specified SUFFIX or ICS (included) • to next SUFFIX or ICS (excluded) if listed Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 204/270 8DG 07734 AAAA Edition 01 Hardware Settings...
Page 207
If you have the unit identified by one of this identification data: ANV CODE 3AL 34422 AAAC 3AL 34422 AAAD you will use Part 2 of paragraph for 3AL 34422 AAAA Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Hardware Settings 8DG 07734 AAAA Edition 01 205/270...
Exercise caution to avoid shorting power input terminals. SAFETY RULES DANGER: Possibility of eyes damage: read carefully and strictly observe the rules pointed out in para.A.2.4.2 on page 233. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 206/270 8DG 07734 AAAA Edition 01...
Page 209
2.8 kg x cm (0.28 Newton x m) +/- 10 % Exceeding this value may result in screw breaking. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Hardware Settings 8DG 07734 AAAA Edition 01 207/270...
6.3 Microswitches “ON” position (3AL 37747 0001) The following figure shows all the available switch type front view and relevant meaninig. Figure 116. Microswitch front view and meaning Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 208/270 8DG 07734 AAAA Edition 01...
Reset Data Base and up-load from back up copy (if available) 1 = ON 2 = ON Raw loader FW waiting for commands from console: application not started. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Hardware Settings 8DG 07734 AAAA Edition 01 209/270...
7.2.4 on page 223 describes the procedure to apply in order to manage Hazardous materials and components (example battery) – Paragraph 7.3 on page 225 reports the ECO declaration info. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Dismantling & Recycling 8DG 07734 AAAA Edition 01 211/270...
These guidelines are not mandatory. They are given in order to optimize the disassembling process and material recovery as whole. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 212/270 8DG 07734 AAAA Edition 01...
Unscrew all the screws present on rear cover as reported in Figure 119.(dashed lines) on page 214. – Remove the rear cover in order to access the subrack Back Panel. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Dismantling & Recycling 8DG 07734 AAAA Edition 01 213/270...
– Remove the side wall of the subrack by unscrew the screw (3), (4), (5) as indicated in Figure 122. on page 216. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Dismantling & Recycling 8DG 07734 AAAA Edition 01 215/270...
– Remove the contact springs (6) from the side wall as indicated in Figure 126. on page 219 (refer to paragraph 7.2.4 on page 223 for info about hazardous parts dismantling). Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 218/270 8DG 07734 AAAA Edition 01 Dismantling &...
– Extract from the top the contact spring (C) as indicated in Figure 128. on page 221 (refer to paragraph 7.2.4 on page 223 for info about hazardous parts dismantling). Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 220/270 8DG 07734 AAAA Edition 01...
Extract the Hard Disk from the connector (refer to Figure 129. on page 222). – Extract the RAM memory as reported in Figure 129. on page 222. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Dismantling & Recycling 8DG 07734 AAAA Edition 01 221/270...
Remove the daughter board by extracting it from the main board (refer to Figure 129. on page 222). Removal SCREWS Daughter board Hard Disk extraction Figure 129. Hard Disk and daughter board removal Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 222/270 8DG 07734 AAAA Edition 01 Dismantling & Recycling...
Cadmium Capacitors with PCB's Capacitors with substances of concern + height > 25 mm, diameter > 25 mm or pro- portionately similar volume Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Dismantling & Recycling 8DG 07734 AAAA Edition 01 223/270...
Page 226
(CAS no. 32534-81-9, CAS no. 32536-52- 0, CAS no 1163-19-5, CAS no. 13654-09- 6) contained in mechanical parts heavier than 25g, in concentrations exceeding the natural background levels. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 224/270 8DG 07734 AAAA Edition 01 Dismantling & Recycling...
7.3 Eco declaration 1850 TSS-320 is an STM-1/4/16 MultiService Node for transmission and cross-connection of a wide range of traditional PDH and SDH signals as well as packed based data flows. It can operate as a multi Terminal or Add/Drop Multiplexer.
Page 228
For details refer to" Installation Handbook". TAKE BACK INFORMATION On request of customers, Alcatel can take care of the take back of depreciated equipment and of the ecological safe and appropriate disposal under conditions to be agreed. For that purpose Alcatel co-operates with qualified companies.
Do not attempt to remove his clothing from the burnt parts; • Apply dry gauze on the burns; • Do not apply ointments or other oily substances. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Safety - EMC - ESD norms and labels 8DG 07734 AAAA Edition 01 227/270...
Page 230
Start with ten rapid expirations, hence continue at a rate of twelve/fifteen expirations per minute. Go on like this until the patient has regained consciousness, or until a doctor has ascertained his death. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common...
The safety rules described at the beginning of the handbook are distinguished by the following symbol and statement: SAFETY RULES Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Safety - EMC - ESD norms and labels 8DG 07734 AAAA Edition 01 229/270...
• heat-radiating mechanical parts Pay attention to the information stated in the following, and proceed as instructed Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 230/270 8DG 07734 AAAA Edition 01 Safety - EMC - ESD norms and labels...
The symbols presented in para.A.2.3 through A.2.7 are all the possible symbols that could be present on Alcatel equipment, but are not all necessarily present on the equipment this handbook refers to. A.2.3 Dangerous Electrical Voltages A.2.3.1 Electrical Safety: Labelling The following warning label is affixed next to dangerous voltages (>42.4 Vp;...
Precautionary measures taken depend on LASER class • Indications given on openings, panels and safety interlockers example of power and lenght values Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 232/270 8DG 07734 AAAA Edition 01 Safety - EMC - ESD norms and labels...
Page 235
A.2.4.3 Optical safety: equipment specific data Refer to paragraph 5.1.1 on page 184. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Safety - EMC - ESD norms and labels 8DG 07734 AAAA Edition 01 233/270...
The following warning label is affixed next to fans or other moving mechanical parts: Before carrying out any maintenance operation see that all the moving mechanical parts have been stopped. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 234/270 8DG 07734 AAAA Edition 01...
Personal injury can be caused by heat. Avoid touching powered terminals with any exposed part of your body. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Safety - EMC - ESD norms and labels 8DG 07734 AAAA Edition 01 235/270...
• The safety rules are specified in the following chapters: – Chapter 6 paragraph 6.2 on page 206 Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 236/270 8DG 07734 AAAA Edition 01 Safety - EMC - ESD norms and labels...
Screw fasten the units to the subrack. • To correctly install EMC compatible equipment follow the instructions given. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Safety - EMC - ESD norms and labels 8DG 07734 AAAA Edition 01 237/270...
• Clean the dummy covers of the spare units as well. • Screw fasten the units to the subrack. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 238/270 8DG 07734 AAAA Edition 01 Safety - EMC - ESD norms and labels...
• a coiled cord connected to the elasticized band and to the stud on the subrack. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Safety - EMC - ESD norms and labels 8DG 07734 AAAA Edition 01 239/270...
Cautions to avoid possible equipment damage are marked by the following symbol: TITLE... (caution to avoid equipment damage) statement..Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 240/270 8DG 07734 AAAA Edition 01 Safety - EMC - ESD norms and labels...
Standard labels can be affixed to any position on the equipment, as required by the Customer. However, for each of the above are applied the rules defined by each individual Customer. Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Labels affixed to the equipment 8DG 07734 AAAA Edition 01...
NOTE : The above reference numbers are detailed on Table 10.on page 263 Figure 132. Labels on units with standard cover plate Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Labels affixed to the equipment 8DG 07734 AAAA Edition 01...
Note: the label is put on the Top handle for the vertical unit or right handle for the horizontal unit Figure 138. External unit identification: standard Label Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 248/270 8DG 07734 AAAA Edition 01...
Note: the label is put on the Top handle for the vertical unit or right handle for the horizontal unit Figure 139. External unit identification: not standard Label Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Labels affixed to the equipment 8DG 07734 AAAA Edition 01 249/270...
(format ALFA 39 (+ * start, stop); Module = 0,166; Ratio = 2) ACRONYM CUSTOMER FIELD ANV ITEM PART NUMBER + space + ICS Figure 141. Internal unit label Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 250/270 8DG 07734 AAAA Edition 01 Labels affixed to the equipment...
Bar Code Alfa 39 ACRONYM ALCATEL PART NUMBER CLEI Code ALCATEL PART NUMBER Bar Code Alfa 39 (+*start, stop) Figure 144. SFP module label Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Labels affixed to the equipment 8DG 07734 AAAA Edition 01 251/270...
APPENDIX C GENERAL ON ALCATEL CUSTOMER DOCUMENTATION C.1 Products, product–releases, versions and Customer Documentation A "product" is defined by the network hierarchical level where it can be inserted and by the whole of performance and services for which it is meant.
C.4.3 Changes due to new product version A new product version changes the handbook P/N and the edition starts from 01. In this case the modified parts of the handbook are not listed. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 254/270...
CD-ROMs for Network Management products do not contain: • the Installation Guides • the documentation of system optional features that Customers could not buy from Alcatel together with the main applicative SW. – CD-ROMs for Network Elements products do not contain: •...
Whenever a new edition of any of such handbooks/documents is released in the Alcatel archive system, a check in the Alcatel-Information-System is made to identify the list of CD-ROMs that must be updated to include the new editions of these handbooks/documents.
The list of handbooks given here below is valid on the issue date of this Handbook and can be changed without any obligation for ALCATEL to update it in this Handbook. Some of the handbooks listed here below may not be available on the issue date of this Handbook.
Provide information regarding Hardware Equipment Installation procedures. 1850 TSS-320 Rel.1.1 8DG 07734 FAAA Turn up & Commissionig Handbook Provide information regarding Equipment Turn-On, Test and Operation proce- dures. Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 258/270 8DG 07734 AAAA Edition 01 Related Handbooks...
Data/WDM configuration. [10] 1850 TSS-320 Rel.1.1 8DG 07744 CAAA SDH/WDM CT Operator's Handbook Provides Craft Terminal information screens and operational procedure dedicated to SDH/WDM configuration. Table 13. Handbooks common to 1850 TSS-320 THIS HANDBOOK Part Number HDBK [11] TSS ETSI RACK-Rel.5.0...
See for details on cd-rom organization para. C.5 on page 255 Documentation CD-ROM TITLE Part Number 1850 TSS-320 Rel.1.1 COMMON CD-ROM EN 8DG 07735 AAAA Contains, in electronic format, the following handbooks: REF.[1], [5], [6], [7], and [8] [1][8] 1850 TSS-320 Rel.1.1 DATA/WDM CD-ROM EN 8DG 07735 BAAA Contains, in electronic format, the following handbooks: REF.
Bit Interleaved Parity Bayonet Not Coupling Storing command European Conformity Central Office Customer premises equipment Craft Terminal Code Mark Inversion COAX Coaxial Incoming parallel contacts Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Abbreviations 8DG 07734 AAAA Edition 01 261/270...
Page 264
Field Programmable Gate Array Gate Array Gigabit Ethernet Ground Hard Disk HDBK Handbook HDB3 High Density Bipolar Code HIGHREFL High Optical reflections Higher Order High Order Adaptation Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 262/270 8DG 07734 AAAA Edition 01 Abbreviations...
Page 265
Loss of alignment Low Order Interface Loss Of Multiframe Loss Of Pointer Loss of signal Loss Of Pointer Lower order path adaption Lower order path connection Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Abbreviations 8DG 07734 AAAA Edition 01 263/270...
Page 266
Optical Transport Hierarchy Optical channel Transport Unit Output Parallel/Serial converter Personal Computer Plesiochronous Digital Hierarchy PFAIL Power supply failure Physical interface Plug In Module Pointer Justification Event Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 264/270 8DG 07734 AAAA Edition 01 Abbreviations...
Page 267
Reception Shelf Controller Signal Degrade Synchronous Digital Hierarchy SDH Equipment Clock SETG Synchronous Equipment Timing Generation function Signal Fail Second Level Controller Single Longitudinal Mode Technical Handbook Common Alcatel 1850 TSS-320 Rel. 1.1 Abbreviations 8DG 07734 AAAA Edition 01 265/270...
CD-ROM, saving, filling and sending it by e-mail to your Local Alcatel Technical Assistance Center. • creating a dedicated form on paper or file and sending it to your Local Alcatel Technical Assistance Center. We’ll take into account of your suggestion.
Page 272
Which subject to deepen: How to deepen: Subject to eliminate or reduce Other comments/suggestions Errors Identified Reader Info Name: Date: Company: Job: Address: E-mail: Phone: Fax: Alcatel 1850 TSS-320 Rel. 1.1 Technical Handbook Common 270/270 8DG 07734 AAAA Edition 01 Customer Documentation Feedback...
Page 274
All rights reserved. Passing on and copying of this document, use and communication of its contents is not permitted without written authorization from Alcatel.
THIS PAGE MUST NOT BE INCLUDED IN THE HANDBOOK ASSEMBLY INSTRUCTIONS Total Pages: 270 + 6 NOTES: --- COVER LABELS (according to Alcatel Italy binder format) Alcatel 1850 TSS-320 Rel. 1.1 Metro Core Transport Service Switch Technical Handbook Common 8DG 07734 AAAA - Ed. 01 Alcatel 1850 TSS-320 Rel.
THIS PAGE MUST NOT BE INCLUDED IN THE HANDBOOK HANDBOOK EDITORIAL INFORMATION Technical Handbook Common Metro Core Transport Service Switch Alcatel 1850 TSS-320 Rel. 1.1 8DG 07734 AAAA Ed. 01 RELEASED Change Note: Not applicable Unit: FCG OND OMSN Vimercate 20 July 2006 Author: P.E.