A.3.2 General Norms - Turn-up & Commissioning, Operation
•
Preset the electrical units as required to guarantee EMC compatibility
•
Check that the equipment is operating with all the shields properly positioned (dummy covers,
ESD connector protections, etc.)
•
To properly use EMC compatible equipment observe the information given
A.3.3 General Norms - Maintenance
•
Before inserting the shielded unit, which will replace the faulty or modified unit, proceed to clean
and degrease all peripheral surfaces (contact springs and connection points, etc.)
•
Clean the dummy covers of the spare units as well.
•
Screw fasten the units to the subrack.
Alcatel 1850 TSS-320 Rel. 1.1
238/270
8DG 07734 AAAA Edition 01
Technical Handbook Common
Safety - EMC - ESD norms and labels