Step1 Set The Received Call Sign To The Destination; Step2 Hold Down [Ptt] To Transmit; Making A Local Area Call; Step1 Set "From" (Access Repeater) - Icom ID-51A Basic Instructions

New2001 New2001
STEP 1 Set the received call sign to the destination
Hold down for 1 second.
the station call sign is announced if
the RX>CS Speech function is set
to ON in the MENU screen.
(MENU > SPEECH > RX>CS SPEECH)
ing a call sign.
NOTE:
rotate [DIAL] while holding down
the power save is ON, the call sign may not be received
correctly. In that case, "--------" appears, an error beep
New2001
4

MAKING A LOCAL AREA CALL

A Local area call can be made when "Local CQ" is used to set
"CQCQCQ" in "TO" (Destination).
What is a Local Area Call??
To call through your local area (access) repeater.
27
Beeps
While holding down
-
Beeps
After releasing
.
Repeater
Repeater area
CAPTURING A CALL SIGN
STEP 2 Hold down [PTT] to transmit
While holding down [PTT],
q
level.
.
Push or [CLR]
w
return to the previous call sign
setting.
.
Set "FROM" (Access repeater)
STEP 1
Push D-pad( !) to select
q
"FROM," and then
D-pad(Ent).
D-pad
(Ent)
( )
Push D-pad( !) to select "Re-
w
peater List," and then push
D-pad(Ent).
Push D-pad( !) to select the
e
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
Push D-pad( !) to select your
r
access repeater, and then
push D-pad(Ent).
Transmitting
to
Return to the previous
screen
push
3
3
26
New2001 New2001