Table of Contents
Advertisement
11.4 Backup/Restoration Setting
The storage location for backup data can be set.
For how to use the backup/restoration, refer to the following manual.
GOT1000 Series Extended/Option Functions Manual for GT Works3
Set the following items with touching the items on the GOT.
Item
Drive for backup setting
Drive for backup data
Trigger backup setting
Max. of backup data
Enable CPU No. setting
Display operation of Backup/restoration setting
Main menu
(
9.3 Utility Display)
Touch
[GOT setup]
Description
The drive for storing backup settings, including parameters and passwords
for controllers, can be selected.
The drive for storing backup data can be selected.
The GOT automatically backs up data when triggers (Rise, Time) specified
for each backup setting are met.
Set the maximum number of backup data to be stored.
(When 0 is specified, the GOT does not check the number of backup data to
be stored.)
Set the CPU No. setting at backup to "YES" or "NO".
GOT setup
Backup/restoration setting
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
A: Built-in SD Card
E: USB memory
(Default: A: Built-in SD Card)
A: Built-in SD Card
E: USB memory
(Default: A: Built-in SD Card)
None/Rise/Time
(Default: None)
Setting range: 0 to 50
(Default: 10)
YES/NO
(Default: NO)
Touch
[Backup/restoration setting]
11.4 Backup/Restoration Setting
9
10
Setting range
11
12
13
14
15
16
11 - 19
Advertisement
Table of Contents
