ip ospf authentication-key (Interface context)
Use the
authentication password. The no form of this command removes the OSPF
password.
Note: This command is executed from the Serial, Loopback, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
[no] ip ospf authentication-key <key>
Parameters
key
Example
config-if:ip ospf authentication-key my_pass
ip ospf cost (Interface context)
Use the
this command sets the cost to its default. The default is 1.
Note: This command is executed from the Serial, Loopback, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
[no] ip ospf cost <cost>
Parameters
cost
Example
ip ospf cost 10
Avaya X330WAN User's Guide
ip ospf authentication-key
A string (up to 8 characters).
command to configure interface metric. The no form of
ip ospf cost
An integer from 1 to 65535.
Layer 3 CLI Commands
command to configure the interface
179