Adding a Port to a LAG
When adding a port to a LAG group, the port must have the same queue groups defined as
the existing ports on the LAG before it will be allowed as a member. This includes all queue
group override parameters.
Basic Configurations
Configuring an Ingress Queue Group Template
The following displays an ingress queue group template configuration example:
*A:Dut-T>cfg>qos>qgrps# info
----------------------------------------------
Quality of Service Guide
•
Configuring an Ingress Queue Group Template
•
Configuring Egress Queue Group Template
•
Applying Ingress Queue Group to SAP Ingress Policy
•
Applying Egress Queue Group to SAP Egress Policy
•
Configuring Queue Group on Ethernet Access Ingress Port
•
Configuring Overrides
•
Configuring Queue Group on Ethernet Access Egress Port
•
Configuring Queue Group for Network Egress Traffic on Port
•
Configuring Queue Group for Network Ingress Traffic on Forwarding Plane
•
Using Queue Groups to Police Ingress/Egress Traffic on Network Interface
•
Configuring Ingress/Egress PW Shaping Using Spoke-SDP Forwarding Class-Based
Redirection
•
Specifying QoS Policies on Service SAPs
ingress
queue-group "QG_ingress_1" create
queue 1 best-effort create
mbs 100
exit
queue 2 best-effort create
mbs 100
exit
queue 3 best-effort create
mbs 100
exit
queue 4 best-effort create
Queue Sharing and Redirection
419