Alcatel-Lucent 7450 Quality Of Service Manual page 316

Service SAP QoS Policy Command Reference
dst-mac
Syntax dst-mac ieee-address [ieee-address-mask]
no dst-mac
Context config>qos>sap-ingress>mac-criteria>entry
Description Configures a destination MAC address or range to be used as a Service Ingress QoS policy match
criterion.
The no form of this command removes the destination mac address as the match criterion.
Default none
Parameters
ieee-address — The MAC address to be used as a match criterion.
ieee-address-mask — A 48-bit mask to match a range of MAC address values.
etype
Syntax etype etype-value
no etype
Context config>qos>sap-ingress>mac-criteria>entry
Description
Configures an Ethernet type II value to be used as a service ingress QoS policy match criterion.
The Ethernet type field is a two-byte field used to identify the protocol carried by the Ethernet frame.
For e.g. 0800 is used to identify the IP v4 packets.
The Ethernet type field is used by the Ethernet version-II frames. IEEE 802.3 Ethernet frames do not
use the type field. For IEEE 802.3 frames use the dsap, ssap or snap-pid fields as match criteria.
316
Values HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is
a hexadecimal digit
This 48-bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
All packets with a source MAC OUI value of 00-03-FA subject to a match condition should
be specified as: 0003FA000000 0x0FFFFF000000
Default 0xFFFFFFFFFFFF (hex) (exact match)
Values 0x00000000000000 to 0xFFFFFFFFFFFF (hex)
Format Syntax
DDDDDDDDDDDDDD
0xHHHHHHHHHHHH
0bBBBBBBB...B
Example
281474959933440
0xFFFFFF000000
0b11110000...B
Quality of Service Guide