Command Descriptions - Alcatel-Lucent 7450 Quality Of Service Manual

Command Descriptions

Configuration Commands
Generic Commands
description
Syntax description description-string
no description
Context cfg>qos>qgrps>egr>qgrp
cfg>qos>qgrps>ing>qgrp
cfg>qos>qgrps>ing>qgrp>policer
Description
This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of this command removes the string from the configuration.
Default none
Parameters description-string — The description character string. Allowed values are any string up to 80
Queue Group Commands
queue-group-templates
Syntax queue-group-templates
Context config>qos
Description This command enables the context to define ingress and egress queue group templates.
Default none
Quality of Service Guide
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Queue Sharing and Redirection
437