Alcatel-Lucent 7450 Quality Of Service Manual page 319

Description Configures an IEEE 802.3 LLC SNAP Ethernet frame PID value to be used as a service ingress QoS
policy match criterion.
This is a two-byte protocol id that is part of the IEEE 802.3 LLC SNAP Ethernet Frame that follows
the three-byte OUI field.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the
same match criteria.
The snap-pid match criteria is independent of the OUI field within the SNAP header. Two packets
with different three-byte OUI fields but the same PID field will both match the same policy entry based
on a snap-pid match criteria.
The no form of this command removes the snap-pid value as the match criteria.
Default none
Parameters smap-pid — The two-byte snap-pid value to be used as a match criterion in hexadecimal.
src-mac
Syntax src-mac ieee-address [ieee-address-mask]
no src-mac
Context config>qos>sap-ingress>mac-criteria>entry
Description This command configures a source MAC address or range to be used as a service ingress QoS policy
match criterion.
The no form of this command removes the source mac as the match criteria.
Default none
Parameters ieee-address — Enter the 48-bit IEEE mac address to be used as a match criterion.
ieee-address-mask — This 48-bit mask can be configured using:
Quality of Service Guide
Values 0x0000 to 0xFFFF
Values HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is
a hexadecimal digit
This 48 bit mask can be configured using the following formats
Format Style
Decimal
Hexadecimal
Binary
Service Egress and Ingress QoS Policies
Format Syntax
DDDDDDDDDDDDDD
0xHHHHHHHHHHHH
0bBBBBBBB...B
Example
281474959933440
0x0FFFFF000000
0b11110000...B
319