Applying Network Policies - Alcatel-Lucent 7450 Quality Of Service Manual

Basic Configurations
A:ALA-10:A:ALA-12>config>qos# info
#------------------------------------------
echo "QoS Policy Configuration"
#------------------------------------------
...
...
#------------------------------------------
A:ALA-12>config>qos#

Applying Network Policies

Use the following CLI syntax to apply network policies to the router access uplink port's IP
interfaces:
CLI Syntax:
The following output displays the configuration for router interface ALA-1-2 with network
policy 600 applied to the interface.
A:ALA-7>config>router# info
#------------------------------------------
echo "IP Configuration"
#------------------------------------------
...
...
----------------------------------------------
A:ALA-7>config>router#
86
network 600 create
description "Network Egress Policy"
ingress
default-action fc ef profile in
exit
egress
remarking
exit
exit
config>router
interface interface-name
qos network-policy-id
interface "ALA-1-2"
address 10.10.4.3/24
qos 600
exit
dot1p dot1p-priority fc {fc-name} profile {in
| out}
dscp dscp-name fc {be | l2 | af | l1 | h2 | ef
| h1 | nc} profile {in | out}
ler-use-dscp
lsp-exp lsp-exp-value fc fc-name profile {in |
out}
Quality of Service Guide