Alcatel-Lucent 7450 Quality Of Service Manual page 371

Quality of Service Guide
Label
Description
Default FC
Priority
Criteria-type
Mode
CIR Admin
CIR Oper
CIR Rule
PIR Admin
PIR Oper
PIR Rule
Service Egress and Ingress QoS Policies
Description (Continued)
Template
Implies that this policy can be applied to multiple SAPs on the router.
A text string that helps identify the policy's context in the configuration
file.
Specifies the default forwarding class for the policy.
Specifies the enqueuing priority when a packet is marked with a dot1p-
value specified.
IP
Specifies that an IP criteria-based SAP ingress policy is used to select the
appropriate ingress queue and corresponding forwarding class for
matched traffic.
MAC
Specifies that a MAC criteria-based SAP is used to select the appropriate
ingress queue and corresponding forwarding class for matched traffic.
Specifies the configured mode of the meter (trTcm or srTcm).
Specifies the administrative Committed Information Rate (CIR)
parameters for the queue. The CIR defines the rate at which the system
prioritizes the queue over other queues competing for the same
bandwidth.
The operational value derived by computing the CIR value from the
administrative CIR and PIR values and their corresponding adaptation
rules.
min
The operational CIR for the queue will be equal to or greater than the
administrative rate specified using the rate command.
max
The operational CIR for the queue will be equal to or less than the
administrative rate specified using the rate command.
closest
The operational PIR for the queue will be the rate closest to the rate
specified using the rate command without exceeding the operational PIR.
Specifies the administrative Peak Information Rate (PIR) parameters for
the queue. The PIR defines the maximum rate that the queue can transmit
packets through the switch fabric (for SAP ingress queues) or out an
egress interface (for SAP egress queues).
The administrative PIR specified by the user.
min
The operational PIR for the queue will be equal to or greater than the
administrative rate specified using the rate command.
max
The operational PIR for the queue will be equal to or less than the
administrative rate specified using the rate command.
371