Alcatel-Lucent 7450 Quality Of Service Manual page 460

Ethernet service switch; service router; extensible routing system
Hide thumbs Also See for 7450:
Table of Contents

Advertisement

QoS Queue Group Template Command Reference
Context
config>qos>queue-group-templates>egress>queue-group-template>fc
Description
This command is used to map the forwarding class to the specified queue-id. The specified queue-id
must exist within the egress queue group template. Once a queue is defined in a forwarding class
mapping, that queue cannot be deleted unless the forwarding class mapping is moved to another queue
within the template. Other criteria may also exist preventing the queue from being deleted from the
template such as an applied SAP egress QoS policy mapping to the queue.
Parameters
queue-id — The specified queue-id must exist within the egress queue group template.
ingress
Syntax
ingress
Context
config>qos>qgrps
Description
This command enables the context to create ingress queue group templates. Ingress queue group
templates can be applied to ingress ports to create an ingress queue group of the same name.
An ingress template must be created for a group-name prior to creating a queue group with the same
name on an ingress port.
Default
none
queue
Syntax
queue queue-id [multipoint] [queue-type] [queue-mode] [create]
no queue queue-id
Context
cfg>qos>qgrps>egr>qgrp
cfg>qos>qgrps>ing>qgrp
Description
This command creates a queue for use in a queue group template. Once created, the defined queue-id
acts as a repository for the default parameters for the queue. The template queue is created on each
queue-group object which is created with the queue group template name. Each queue is identified
within the template by a queue-id number. The template ensures that all queue groups created with the
template? name will have the same queue-ids providing a uniform structure for the forwarding class
redirection commands in the SAP ingress QoS policies. The parameters within the template queue will
be used as the default settings for each queue in the actual queue group. The queue parameters may be
individually changed for each queue in each queue group using per queue overrides.
Once a queue within a template is mapped by a forwarding class on any object, the queue may be
edited, but not deleted.
460
Values
1 to 8
Default
Dependent on user or system created template.
Quality of Service Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

79507750

Table of Contents