Configuring Ingress Queue Group Templates - Alcatel-Lucent 7450 Quality Of Service Manual

QoS Queue Group Template Command Reference

Configuring Ingress Queue Group Templates

config
434
— qos
— queue-group-templates
— ingress
—
— no
—
— stat-mode {no-stats | minimal | offered-profile-no-cir |
offered-priority-no-cir | offered-limited-profile-cir |
offered-profile-cir | offered-priority-cir | offered-total-
cir | offered-profile-capped-cir | offered-limited-
capped-cir}
— no stat-mode
— queue queue-id [queue-type] [create]
— no queue queue-id
— adaptation-rule
— no adaptation-rule
— adv-config-policy
— no adv-config-policy
— burst-limit
— no burst-limit
— burst-limit
— no burst-limit
— cbs size-in-kbytes
— no cbs
— [no] dynamic-mbs
— hi-low-prio-only
— no hi-low-prio-only
— high-prio-only
— no high-prio-only
— mbs size [bytes | kilobytes]
— no mbs
— parent scheduler-name [weight weight] [level level] [cir-
weight cir-weight] [cir-level cir-level]
— no parent
— packet-byte-offset
— no packet-byte-offset
— percent-rate
— no percent-rate
— pool pool-name
— no pool
— port-parent
weight] [cir-level cir-level]
— no port-parent
— queue-delay
— no queue-delay
— rate pir-rate [cir cir-rate]
— no rate
description description-string
description
queue-group queue-group-name [create]
[pir adaptation-rule] [cir adaptation-rule]
adv-config-policy-name
size-in-kbytes
percent
percent
{add bytes | subtract bytes}
per-percent [cir cir-percent]
[weight weight] [level level] [cir-weight cir-
delay
Quality of Service Guide