Overview
...
----------------------------------------------
A:SR>config>service#
IES
Use the following CLI syntax to apply scheduler policies to ingress and/or egress IES SAPs:
CLI Syntax:
The following output displays an IES service configuration with scheduler policy SLA2
applied to the SAP ingress and egress.
A:SR>config>service# info
----------------------------------------------
----------------------------------------------
A:SR>config>service#
VPLS
Use the following CLI syntax to apply scheduler policies to ingress and/or egress VPLS
SAPs:
540
exit
egress
scheduler-policy "SLA2"
qos 1010
exit
exit
config>service# ies service-id [customer customer-id]
interface ip-int-name
sap sap-id
egress
ingress
ies 88 customer 8 vpn 88 create
interface "Sector A" create
sap 1/1/1.2.2 create
ingress
scheduler-policy "SLA2"
qos 101
exit
egress
scheduler-policy "SLA2"
qos 1020
exit
exit
exit
no shutdown
exit
scheduler-policy scheduler-policy-name
scheduler-policy scheduler-policy-name
Quality of Service Guide