Alcatel-Lucent 7450 Quality Of Service Manual page 441

Ethernet service switch; service router; extensible routing system
Hide thumbs Also See for 7450:
Table of Contents

Advertisement

Once a policer is created, it cannot be deleted from the queue-group template unless any forwarding
classes that are redirected to the policer are first removed.
The no form of this command deletes the policer.
Parameters
policer-id — The policer-id must be specified when executing the policer command. If the
port-redirect-group
Syntax
port-redirect-group {queue queue-id | policer policer-id [queue queue-id]}
no port-redirect-group
Context
config>qos>network>egress>fc
Description
This command is used to redirect the FC of a packet of a PW or network IP interface to an egress port
queue-group.
It defines the mapping of a FC to a queue-id or a policer-id and a queue-id and redirects the lookup of
the queue or policer of the same ID in some egress port queue-group instance. However, the queue-
group name and instance are explicitly provided only at the time the network QoS policy is applied to
egress context of a spoke-sdp or a network IP interface.
The no version of this command removes the redirection of the FC.
Parameters
queue queue-id — The specified queue-id must exist within the queue-group template applied to
policer policer-id — The specified policer-id must exist within the queue-group template applied
fp-redirect-group
Syntax
fp-redirect-group policer policer-id
no fp-redirect-group policer
Context
config>qos>network>ingress>fc
Quality of Service Guide
specified ID already exists, the system enters that policer's context to allow the policer's
parameters to be modified. If the ID does not exist and is within the allowed range for the QoS
policy type, a context for the policer ID will be created (depending on the system's current
create keyword requirements which may require the create keyword to actually add the new
policer ID to the QoS policy) and the system will enter that new policer's context for possible
parameter modification.
Values
1 to 32 ingress
1 to 8 egress
the egress context of the port.
Values
1 to 8
to the egress context of the port
Values
1 to 8
Queue Sharing and Redirection
441

Advertisement

Table of Contents
loading

This manual is also suitable for:

79507750

Table of Contents