Alcatel-Lucent 7450 Quality Of Service Manual page 708

ATM QoS Policy Command Reference
atm-td-profile
Syntax atm-td-profile [traffic-desc-profile-id] [detail]
Context show>qos
Description This command displays ATM traffic descriptor profile information.
Parameters traffic-desc-profile-id — Displays the ATM traffic descriptor profile.
detail — Displays detailed policy information including policy associations.
Output ATM TD Profile Output —
output.
Sample
A:ALA-48>config>qos>atm-td-profile# show qos atm-td-profile
===============================================================================
Traffic Descriptor Profiles
710
Values 1 to 1000
Table 56: ATM Traffic Descriptor Profile Command Output Fields
Label
Maximum Supported
Profiles
Currently Configured
Profiles
TDP-Id
Description
Service Category
SCR
PIR
MIR
MBS
Shaping
Entities using TDP-ID
-
Table 56 describes ATM traffic descriptor profile show command
Description
Displays the maximum number of ATM traffic descriptor profiles that can
be configured on this system.
Displays the number of currently configured ATM traffic descriptor
profiles on this system.
The ID that uniquely identifies the traffic descriptor policy.
A text string that helps identify the policy's context in the configuration
file.
Displays the ATM service category.
Displays the sustained cell rate in Kbps.
Displays the peak cell rate in Kbps.
Displays the Minimum Desired Cell Rate in Kbps.
Displays the maximum burst size in cells.
Displays whether shaping is enabled or disabled for the traffic descriptor
profile.
Displays the number of entities using the ATM traffic descriptor.
Indicates that the parameter is not applicable for the configured service
category.
Quality of Service Guide