Default Shared Queue Policy Values - Alcatel-Lucent 7450 Quality Of Service Manual

Overview
----------------------------------------------
A:SR>config>service#
VPRN Services
Use the following CLI syntax to apply QoS policies to ingress VPRN SAPs on the 7750 SR
and 7950 XRS:
CLI Syntax:
The following output displays a VPRN service configuration. The default SAP ingress policy
was not modified but shared queuing was enabled.
A:SR7>config>service# info
----------------------------------------------
----------------------------------------------
A:SR7>config>service#

Default Shared Queue Policy Values

The only allowed shared queue policy is the default and cannot be deleted. The only
configurable entities are the queue priority, attributes of individual queues and the description
string.
650
exit
exit
exit
config>service# vprn service-id [customer customer-id]
interface ip-int-name
sap sap-id
vprn 1 customer 1 create
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
qos 1 multipoint-shared
exit
exit
exit
no shutdown
exit
Table 43 lists the default values.
ingress
qos policy-id [shared-queuing |
multipoint-shared]
Quality of Service Guide