Alcatel-Lucent 7450 Quality Of Service Manual page 714

ATM QoS Policy Command Reference
716
Table 58: Show Port ATM PVC VPI/VCI Detail Output Fields
Label
Port Id
VPI/VCI
Admin State
Oper State
OAM State
Encap Type
Owner
AAL Type
Endpoint Type
Cast Type
Type
Ing. Td Idx
Egr. Td Idx
Last Changed
Octets
Cells
Packets
Dropped Packets
Description
Displays the port ID.
Displays the VPI/VCI values.
Displays the administrative state of the interface connection.
Indicates the status of the ATM interface.
Indicates the OAM operational status of ATM connections.
ETE indicates end-to-end connection.
AIS denotes alarm indication signal.
RDI denotes for remote defect indication.
AIS-LOC indicates the alarm was due to loss of continuity of periodic
loopbacks.
Indicates the encapsulation type.
Identifies the system entity that owns a specific ATM connection.
Displays ATM Adaptation Layer 5 (AAL5) information.
Displays the endpoint type.
Indicates the connection topology type.
Indicates the connection type.
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Specifies the ATM traffic descriptor profile that applies to the
transmit direction of the interface connection.
Indicates the date and time when the interface connection entered its
current operational state.
Displays the number of input and output octets.
HEC discarded cells are not included in the input octet numbers.
Displays the number of input and output cells.
HEC discarded cells are not included in the input cell numbers.
Displays the number of input and output packets.
Packets discarded due to HEC or oversize discards are not counted.
CRC errored are also in the packet counts and display on the VC level
statistics but not on the port level.
Displays the number of packets dropped by the ATM SAR device.
Quality of Service Guide