Alcatel-Lucent 7450 Quality Of Service Manual page 444

QoS Queue Group Template Command Reference
adv-config-policy
Syntax adv-config-policy adv-config-policy-name
no adv-config-policy
Context config>qos>qgrpid>egress>qgrp>policer
config>qos>qgrpid>ingress>qgrp>policer
Description This command specifies the name of the advanced configuration policy to be applied with this policer.
Parameters
adv-config-policy-name — Specifies an existing advanced configuration policy up to 32
burst-limit
Syntax burst-limit {default | size [bytes | kilobytes]}
no burst-limit
Context config>qos>qgrps>egr>qgrp>queue
config>qos>qgrpid>ing>qgrp>queue
Description
The queue burst-limit command is used to define an explicit shaping burst size for a queue. The
configured size defines the shaping leaky bucket threshold level that indicates the maximum burst over
the queue's shaping rate.
The burst-limit command is supported under the sap-ingress and sap-egress QoS policy queues. The
command is also supported under the ingress and egress queue-group-templates queues.
The no form of this command is used to restore the default burst limit to the specified queue. This is
equivalent to specifying burst-limit default within the QoS policies or queue group templates. When
specified within a queue-override queue context, any current burst limit override for the queue will be
removed and the queue's burst limit will be controlled by its defining policy or template.
Parameters
default — The default parameter is mutually exclusive to specifying an explicit size value. When
444
min — The min (minimum) option is mutually exclusive with the
max and closest options. When min is defined, the operational
PIR for the queue will be equal to or greater than the
administrative rate specified using the rate command.
closest — The closest parameter is mutually exclusive with the
min and max parameter. When closest is defined, the operational
PIR for the queue will be the rate closest to the rate specified using
the rate command.
characters in length.
burst-limit default is executed, the queue is returned to the system default value.
Quality of Service Guide