Alcatel-Lucent 7450 Quality Of Service Manual page 108

Ethernet service switch; service router; extensible routing system

Hide thumbs Also See for 7450:

Table of Contents

Network QoS Policy Command Reference

The no form of this command removes the specified entry from the policy. Entries removed from the

policy are immediately removed from all services where that policy is applied.

entry-id — The entry-id, expressed as an integer, uniquely identifies a match criterion and the

create — Required parameter when creating a flow entry when the system is configured to require

match [protocol protocol-id]

config>qos>network>ingress>ip-criteria>entry

This command creates a context to configure match criteria for an ingress network QoS policy match

criteria. When the match criteria have been satisfied the action associated with the match criteria is

If more than one match criteria (within one match statement) are configured then all criteria must be

satisfied (AND function) before the action associated with the match is executed.

A match context can consist of multiple match criteria, but multiple match statements cannot be

entered per entry.

It is possible that a network QoS policy includes the dscp map command, the dot1p map command,

and an IP match criteria. When multiple matches occur for the traffic, the order of precedence is used

to arrive at the final action. The order of precedence is as follows:

The no form of this command removes the match criteria for the entry-id.

corresponding action. It is recommended that multiple entries be given entry-ids in staggered

increments. This allows users to insert a new entry in an existing policy without requiring

renumbering of all the existing entries.

An entry cannot have any match criteria defined (in which case, everything matches) but must

have at least the keyword action fc fc-name profile {in | out}] for it to be considered complete.

Entries without the action keyword will be considered incomplete and hence will be rendered

the explicit use of the keyword to prevent accidental object creation. Objects may be

accidentally created when this protection is disabled and an object name is mistyped when

attempting to edit the object. This keyword is not required when the protection is disabled.

The keyword is ignored when the flow entry already exists.

IP Quintuple

Quality of Service Guide