Alcatel-Lucent 7450 Quality Of Service Manual page 379

Policy-Id
-------------------------------------------------------------------------------
1
10
20
-------------------------------------------------------------------------------
Number of policies : 3
-------------------------------------------------------------------------------
===============================================================================
*A:#
sap-egress
Syntax sap-egress [policy-id] [association | match-criteria | hsmda | detail]
Context show>qos
Description This command displays SAP egress QoS policy information.
Special Cases SAP Egress Output — The following table describes SAP egress show command output.
Quality of Service Guide
Scope Name
Template default
Template
Template
Label
Policy-Id
Scope
Description
Queue:
CIR Admin
CIR Oper
CIR Rule
Service Egress and Ingress QoS Policies
Description
The ID that uniquely identifies the policy.
Exclusive
Implies that this policy can only be applied to a single SAP.
Template
Implies that this policy can be applied to multiple SAPs on the router.
A text string that helps identify the policy's context in the configuration
file.
Specifies the administrative Committed Information Rate (CIR)
parameters for the queue. The CIR defines the rate at which the system
prioritizes the queue over other queues competing for the same
bandwidth.
The operational value derived by computing the CIR value from the
administrative CIR and PIR values and their corresponding adaptation
rules.
min
The operational CIR for the queue will be equal to or greater than the
administrative rate specified using the rate command except where the
derived operational CIR is greater than the operational PIR. If the derived
operational CIR is greater than the derived operational PIR, the
operational CIR will be made equal to the operational PIR.
Description
Default SAP ingress QoS policy.
379