Alcatel-Lucent 7450 Quality Of Service Manual page 236

Service SAP QoS Policy Command Reference
default-fc
Syntax default-fc fc-name
Context config>qos>sap-ingress
Description This command configures the default forwarding class for the policy. In the event that an ingress
packet does not match a higher priority (more explicit) classification command, the default forwarding
class or sub-class will be associated with the packet. Unless overridden by an explicit forwarding class
classification rule, all packets received on an ingress SAP using this ingress QoS policy will be
classified to the default forwarding class. Optionally, the default ingress enqueuing priority for the
traffic can be overridden as well.
The default forwarding class is best effort (be). The default-fc settings are displayed in the show
configuration and save output regardless of inclusion of the detail keyword.
Default
be
Parameters fc-name — Specify the forwarding class name for the queue. The value given for fc-name must
default-priority
Syntax default-priority {high | low}
Context config>qos>sap-ingress
Description
This command configures the default enqueuing priority for all packets received on an ingress SAP
using this policy. To change the default priority for the policy, the fc-name must be defined whether
it is being changed or not.
Default
low
236
be one of the predefined forwarding classes in the system.
The sub-class-name parameter is optional and used with the fc-name parameter to define a
preexisting sub-class. The fc-name and sub-class-name parameters must be separated by a
period (dot). If sub-class-name does not exist in the context of fc -name, an error will occur.
If sub-class-name is removed using the no fc fc-name.sub-class-name force command, the
default-fc command will automatically drop the sub-class-name and only use fc-name (the
parent forwarding class for the sub-class) as the forwarding class.
Values
fc: class[.sub-class]
Default
None (Each sub-class-name must be explicitly defined)
class: be, l2, af, l1, h2, ef, h1, nc
sub-class: 29 characters max
Quality of Service Guide