Alcatel-Lucent 7450 Quality Of Service Manual page 300

Service SAP QoS Policy Command Reference
hsmda-counter-override counter-id — The hsmda-counter-override reclassification action is
policer policer-id — When the action policer command is executed, a valid policer-id must be
port-redirect-group-queue queue queue-id — Used to override the forwarding class default
queue queue-id — This parameter overrides the policer's default egress queue destination to a
use-fc-mapped-queue — This parameter overrides the policer's default egress queue destination
entry
Syntax entry entry-id [create]
no entry entry-id
Context config>qos>sap-ingress>ip-criteria
config>qos>sap-egress>ip-criteria
config>qos>sap-ingress>ipv6-criteria
config>qos>sap-ingress>mac-criteria
Description This command is used to create or edit an IP, IPv6, or MAC criteria entry for the policy. Multiple
entries can be created using unique entry-id numbers.
300
optional and only has significance on SAPs which are created on an HSMDA. When
specified, packets matching the IP precedence value will be mapped to the defined HSMDA
exception counter-id for the packets queue group. The default behavior is to use the default
counter on the queue group for the queue to which the packet is mapped. The hsmda-counter-
override action may be overwritten by an ip-criteria reclassification rule match. The specified
counter-id must be specified as an integer between 1 and 8. To remove the ESMDA exception
counter reclassification action for the specified dscp-value, the dscp command must be re-
executed without the hsmda-counter-override reclassification action defined. This keyword
is mutually exclusive with the redirection to a policer.
Values 1 to 8
Default None
specified. The parameter policer-id references a policer-id that has already been created
within the sap-egress QoS policy.
Values
1 to 63
Default none
egress queue destination to an egress port queue group. The specific egress queue group
instance to use is specified at the time that the QoS policy is applied to the SAP. Therefore,
this parameter is only valid if SAP based redirection is required. The queue parameter
overrides the policer's default egress queue destination to a specified queue-id in the egress
port queue group instance is used.
Values 1 to 8
specified local SAP queue of that queue-id. A queue of ID queue-id must exist within the
egress QoS policy.
Values
1 to 8
to the queue mapped by the traffic's forwarding class.
Quality of Service Guide