Alcatel-Lucent 7450 Quality Of Service Manual page 173

default — Specifies the size of the MBS to be the default value configured on the system.
percent-rate
Syntax percent-rate percentage
no percent-rate
Context config>qos>network-queue>egress-hsmda>queue
Description This command specifies the PIR shaping rate for the HSMDA queue. This command only applies to
the 7450 ESS and 7750 SR.
The no form of the command returns the PIR size for the queue to the default value.
Parameters percentage — Specifies the PIR percentage rate for the HSMDA queue.
wrr-weight
Syntax wrr-weight value
no wrr-weight
Context config>qos>network-queue>egress-hsmda>queue
Description This command assigns the weight value to the HSMDA queue. This command only applies to the 7450
ESS and 7750 SR.
The no form of the command returns the weight value for the queue to the default value.
Parameters value — Specifies the weight for the HSMDA queue.
Network Queue QoS Policy Queue Commands
queue
Syntax queue queue-id [multipoint] [queue-type] pool pool-name [create]
no queue queue-id
Context config>qos>network-queue
Description This command enables the context to configure a QoS network-queue policy queue.
Quality of Service Guide
Values
0.10 to 100.00
Values 1 to 32
Network Queue QoS Policies
173