Alcatel-Lucent 7450 Quality Of Service Manual page 442

QoS Queue Group Template Command Reference
Description This command is used to redirect the FC of a packet of a pseudowire or network IP interface to an
ingress forwarding plane queue-group.
It defines the mapping of a FC to a policer-id and redirects the lookup of the policer of the same ID in
some ingress forwarding plane queue-group instance. However, the queue-group name and instance
are explicitly provided only at the time the network QoS policy is applied to the ingress context of a
spoke-sdp or a network IP interface.
The no version of this command removes the redirection of the FC.
Parameters policer policer-id — The specified policer-id must exist within the queue-group template applied
fp-redirect-group
Syntax fp-redirect-group multicast-policer policer-id
no fp-redirect-group multicast-policer
Context config>qos>network>ingress>fc
Description This command is used to redirect the FC of a multicast packet of a pseudowire or network IP interface
to an ingress forwarding plane queue-group.
It defines the mapping of a FC to a policer-id and redirects the lookup of the policer of the same ID in
some ingress forwarding plane queue-group instance. However, the queue-group name and instance
are explicitly provided only at the time the network QoS policy is applied to the ingress context of a
spoke-sdp or a network IP interface.
The no version of this command removes the redirection of the FC.
Parameters
multicast-policer policer-id — The specified policer-id must exist within the queue-group
queue
Syntax queue queue-id [queue-type] [create]
no queue queue-id
Context cfg>qos>qgrps>egr>qgrp
442
to the ingress context of the forwarding plane
Values 1 to 8
template applied to the ingress context of the forwarding plane
Values 1 to 32
Quality of Service Guide