Alcatel-Lucent 7450 Quality Of Service Manual page 545

*B:ALU-A>config>port# info
----------------------------------------------
----------------------------------------------
*B:ALU-A>config>port# /configure lag 30
*B:ALU-A>config>lag# info
----------------------------------------------
*B:ALU-A>config>service>ies>if>sap# /configure qos port-scheduler-policy "psp"
*B:ALU-A>config>qos>port-sched-plcy# info
----------------------------------------------
Before enabling dist-lag-rate-shared, in the port-scheduler-policy psp, the max-rate
achieved is twice 413202 kbps 816Mbps. This is because LAG has members from two
different cards.
Two port-scheduler-instances are created, one on each card with the max-rate of 413202
kbps. This can be confirmed using the following show o/p.
Once dist-lag-rate-shared is enabled in port-scheduler-policy, this max-rate is enforced across
all members of the LAG.
*B:ALU-A>config>service>ies>if>sap# /show qos scheduler-hierarchy sap lag-30 egress
detail
===============================================================================
Scheduler Hierarchy - Sap lag-30
===============================================================================
Egress Scheduler Policy :
-------------------------------------------------------------------------------
Legend :
(*) real-time dynamic value
(w) Wire rates
B
-------------------------------------------------------------------------------
Root (Egr)
| slot(2)
|--(S) : Tier0Egress:1->lag-30:0.0->1 (Port lag-30 Orphan)
|
|
|
|
Quality of Service Guide
ethernet
mode access
egress-scheduler-policy "psp"
autonegotiate limited
exit
no shutdown
description "Description For LAG Number 30"
mode access
port 2/1/6
port 2/1/10
port 3/2/1
port 3/2/2
no shutdown
max-rate 413202
Bytes
| AdminPIR:2000000
| Parent Limit Unused Bandwidth: not-found
|
| AvgFrmOv:101.65(*)
AdminCIR:0(sum)
QoS Scheduler Policies
545