Alcatel-Lucent 7450 Quality Of Service Manual page 463

police — Specifies that the out of profile traffic feeding into the physical queue instance should
policer
Syntax policer policer-id [create]
no policer
Context cfg>qos>qgrps>ing>qgrp
Description This command configures a QoS ingress queue-group policer.
Default none
Parameters policer-id — This required parameter identifies the queue-group policer that will either be created
create — This optional keyword creates an ingress queue-group policer.
profile-capped
Syntax profile-capped
no profile-capped
Context cfg>qos>qgrps>ing>qgrp>policer
Description This command enables a limit on the profile.
Default no profile-capped
packet-byte-offset
Syntax packet-byte-offset {add bytes | subtract bytes}
no packet-byte-offset
Context cfg>qos>qgrps>ing>qgrp>policer
Description
This command configures a packet byte offset for the QoS ingress queue-group policer.
Default none
Quality of Service Guide
be dropped. Using this keyword will override the bandwidth specified by the SAP ingress
queue's administrative CIR.
If the police keyword is not specified, the individual queue group overrides may override both
the defined shaping rate and the cir defined profiling rate. When police is defined, only the
policing rate may be overridden.
or edited within the queue group template.
Values 1 to 32
Queue Sharing and Redirection
463