Show Commands - Alcatel-Lucent 7450 Quality Of Service Manual

Slope QoS Policy Command Reference

Show Commands

slope-policy
Syntax slope-policy [slope-policy-name] [detail]
Context show>qos
Description This command displays slope policy information.
Parameters slope-policy-name — The name of the slope policy.
detail — Displays detailed information about the slope policy.
Slope QoS Policy Output Fields
Output
The following table describes slope QoS policy output fields.
Sample Output
638
Table 42: Show QoS Slope Policy Output Fields
Label
Policy
Description
Time Avg
Slope Parameters
Start Avg
Max Avg
Admin State
Max Prob.
Description
The ID that uniquely identifies the policy.
A string that identifies the policy's context in the configuration file.
The weighting between the previous shared buffer average utilization
result and the new shared buffer utilization.
Specifies the RED slope position for the shared buffer average
utilization value where the packet discard probability starts to increase
above zero.
Specifies the percentage of the shared buffer space for the buffer pool
at which point the drop probability becomes 1, expressed as a decimal
integer
Enabled
The administrative status of the RED slope is enabled.
Disabled
The administrative status of the RED slope is disabled.
Specifies the RED slope position for the maximum non-one packet
discard probability value before the packet discard probability rises
directly to one.
Quality of Service Guide