Operational Commands - Alcatel-Lucent 7450 Quality Of Service Manual

Operational Commands

copy
Syntax copy adv-config-policy src-name dst-name [overwrite]
Context config>qos
Description This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
The copy command is a configuration level maintenance tool used to create new policies using existing
policies. It also allows bulk modifications to an existing policy with the use of the overwrite keyword.
Parameters
adv-config-policy — Indicates that the source policy ID and the destination policy ID are
overwrite — Specifies to replace the existing destination advanced policy. Everything in the
Advanced Policy QoS Commands
adv-config-policy
Syntax [no] adv-config-policy policy-name [create]
Context config>qos
Description This command enables the context to configure an advanced QoS policy. This command contains only
queue and policer child control parameters within a child-control node.
The parameters within the child-control node are intended to allow more precise control of the method
that hierarchical virtual scheduling employs to emulate the effect of a scheduling context upon a
member child queue or policer.
Once a policy is created, it may be applied to a queue or policer defined within a sap-egress or sap-
ingress QoS policy. It may also be applied to a queue or policer defined within an ingress or egress
queue-group template. When a policy is currently associated with a QoS policy or template, the policy
may be modified but not deleted (even in the event that the QoS policy or template is not in use).
Quality of Service Guide
advanced policy IDs. Specify the source advanced policy ID that the copy command will
attempt to copy from and specify the destination advanced policy ID to which the command
will copy a duplicate of the policy.
existing destination policy will be overwritten with the contents of the source advanced
policy. If overwrite is not specified, an error will occur if the destination policy ID exists.
ALA-7>config>qos# copy adv-config-policy default sp1
MINOR: CLI Destination "sp1" exists - use {overwrite}.
ALA-7>config>qos#overwrite
Advanced QoS Policies
677