Alcatel-Lucent 7450 Quality Of Service Manual page 373

Quality of Service Guide
Label
Priority
Prec
UCastQ
MCastQ
BCastQ
UnknownQ
Match Criteria
Entry
Source IP
Source Port
Protocol
DSCP
Fragment
FC
Priority
Src MAC
Dst MAC
Dot1p
Snap-pid
Ethernet-type
Service Egress and Ingress QoS Policies
Description (Continued)
This parameter specifies the default enqueuing priority overrides for all
packets received on an ingress SAP using this policy that match this rule.
High
Specifies that the high enqueuing parameter for a packet increases the
likelihood of enqueuing the packet when the ingress queue is congested.
Low
Specifies that the low enqueuing parameter for a packet decreases the
likelihood of enqueuing the packet when the ingress queue is congested.
Specifies the forwarding class or enqueuing priority when a packet is
marked with an IP precedence value (ip-prec-value).
Specifies the default unicast forwarding type queue mapping.
Specifies the overrides for the default multicast forwarding type queue
mapping.
Specifies the default broadcast forwarding type queue mapping.
Specifies the default unknown unicast forwarding type queue mapping.
Specifies an IP or MAC criteria entry for the policy.
Specifies a source IP address range used for an ingress SAP QoS policy
match.
Specifies a source TCP or UDP port number or port range used for an
ingress SAP QoS policy match.
Specifies the IP protocol number to be used for an ingress SAP QoS
policy match.
Specifies a DiffServ Code Point (DSCP) name used for an ingress SAP
QoS policy match.
True
Configures a match on all fragmented IP packets.
False
Configures a match on all non-fragmented IP packets.
Specifies the entry's forwarding class.
Specifies the default enqueuing priority overrides for all packets received
on an ingress SAP using this policy.
Specifies a source MAC address or range to be used as a Service Ingress
QoS policy match.
Specifies a destination MAC address or range to be used as a Service
Ingress QoS policy match.
Specifies a IEEE 802.1p value to be used as the match.
Specifies an IEEE 802.3 LLC SNAP Ethernet Frame PID value to be used
as a Service Ingress QoS policy match.
Specifies an Ethernet type II Ethertype value to be used as a Service
Ingress QoS policy match.
373