Alcatel-Lucent 7450 Quality Of Service Manual page 566

QoS Scheduler Policy Command Reference
When the maximum number of scheduler policies has been exceeded a configuration error occurs, the
command will not execute, and the CLI context will not change.
If the provided scheduler-policy-name is invalid according to the criteria below, a name syntax error
occurs, the command will not execute, and the CLI context will not change.
Default none — Each scheduler policy must be explicitly created.
Parameters scheduler-policy-name — The name of the scheduler policy.
frame-based-accounting
Syntax frame-based-accounting
no frame-based-accounting
Context config>qos>scheduler-policy
Description The frame-based-accounting command is used to enable frame based for both the children queues
parented to the scheduling policy and for the schedulers within the scheduler policy.
Once frame based accounting is enabled on the policy, all queues associated with the scheduler
(through the parent command on each queue) will have their rate and CIR values interpreted as frame
based values. When shaping, the queues will include the 12 byte Inter-Frame Gap (IFG) and 8 byte
preamble for each packet scheduled out the queue. The profiling CIR threshold will also include the
20 byte frame encapsulation overhead. Statistics associated with the queue do not include the frame
encapsulation overhead.
The scheduler policy's scheduler rate and CIR values will be interpreted as frame based values.
The configuration of parent-location and frame-based-accounting in a scheduler policy is mutually
exclusive to ensure consistency between the different scheduling levels.
The no frame-based-accounting command is used to return all schedulers within the policy and queues
associated with the policy to the default packet based accounting mode. If frame-based-accounting
is not currently enabled for the scheduling policy, the no frame-based-accounting command has no
effect.
parent-location
Syntax parent-location {none | sub | vport}
no parent-location
Context config>qos>scheduler-policy
566
Values Valid names consist of any string up to 32 characters long
composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
Quality of Service Guide