Show Commands - Alcatel-Lucent 7450 Quality Of Service Manual

The CIR can be used by the queue's parent commands cir-level and cir-weight parameters to define
the amount of bandwidth considered to be committed for the child queue during bandwidth allocation
by the parent scheduler.
The rate command can be executed at anytime, altering the PIR and CIR rates for all queues created
through the association of the SAP ingress or SAP egress QoS policy with the queue-id.
The no form of the command returns all queues created with the queue-id by association with the QoS
policy to the default PIR and CIR parameters (100, 0).
Parameters cir percent — Defines the percentage of the guaranteed rate allowed for the queue. When the rate
cir percent — Defines the percentage of the maximum rate allowed for the queue. When the rate

Show Commands

network-queue
Syntax network-queue [network-queue-policy-name] [detail]
Context show>qos
Description This command displays network queue policy information.
Parameters network-queue-policy-name — The name of the network queue policy.
detail — Includes each queue's rates and adaptation-rule and & cbs details. It also shows FC to
Quality of Service Guide
command is executed, a valid PIR setting must be explicitly defined. When the rate command
has not been executed, the default PIR of 100 is assumed. Fractional values are not allowed
and must be given as a positive integer.
The actual PIR rate is dependent on the queue's adaptation-rule parameters and the actual
hardware where the queue is provisioned.
Values 0 to 100
Default 100
command is executed, a CIR setting is optional. When the rate command has not been
executed or the cir parameter is not explicitly specified, the default CIR (0) is assumed.
Fractional values are not allowed and must be given as a positive integer.
Values 0 to 100
Default 0
Values
Valid names consist of any string up to 32 characters long
composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
queue mapping details.
Network Queue QoS Policies
185