Alcatel-Lucent 7450 Quality Of Service Manual page 305

A match context can consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters frame-type keyword — The frame-type keyword configures an Ethernet frame type or an ATM
802dot3 — Specifies the frame type is Ethernet IEEE 802.3.
802dot2-llc — Specifies the frame type is Ethernet IEEE 802.2 LLC.
802dot2-snap — Specifies the frame type is Ethernet IEEE 802.2 SNAP.
ethernet_II — Specifies the frame type is Ethernet Type II.
atm — Specifies the frame type as ATM cell. The user is not allowed to configure entries with
atm-vci
Syntax atm-vci vci-value
no atm-vci
Context config>qos>sap-ingress>mac-criteria>entry>match
Description This command configures a VCI based filter entry in the SAP ingress QoS policy. This command
applies only to the 7450 ESS and 7750 SR.
This new criterion has only take affect when applied to a VPI SAP of an apipe VLL service of type
atm-vpc. The application of this criterion to the ATM SAP of any other ATM VLL service, any other
VLL service, VPLS service, or IES/VPRN service has no effect.
The user is not allowed to configure a MAC matching criterion other than atm-vci once a MAC criteria
filter entry that includes the frame type of atm has been configured.
When the policy is applied to the ingress ATM VPI SAP of an atm-vpc VLL service and a received
packet matches the VCI value configured in the atm-vci parameter, it is assigned the FC in the fc option
of the action part of the filter. This determines which forwarding class queue this packet will be stored.
If the user entered a priority value in the priority option, it is ignored as the priority and profile of ATM
VLL service packets is solely determined based on the ATM conformance definition configured in the
ATM QoS traffic descriptor profile applied to this ATM SAP.
On egress ATM SAP, the Q-chip will queue the packet on the egress SAP queue corresponding to the
packet's FC and forwards the packet to the ATM MDA (CMA). The ATM MDA (CMA) stores the
individual cells it in the VP queue corresponding to the SAP.
Quality of Service Guide
frame type to be used for the MAC filter match criteria.
Default
802dot3
Values 802dot3, 802dot2-llc, 802dot2-snap, ethernet_II, atm
frame type of atm and a frame type of other supported values in the same QoS policy. This
parameter applies only to the 7750 SR ad 7950 XRS.
Service Egress and Ingress QoS Policies
305