Alcatel-Lucent 7450 Quality Of Service Manual page 315

dsap
Syntax dsap dsap-value [dsap-mask]
no dsap
Context config>qos>sap-ingress>mac-criteria>entry
Description Configures an Ethernet 802.2 LLC DSAP value or range for an ingress SAP QoS policy match
criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the
same match criteria.
Use the no form of this command to remove the dsap value as the match criterion.
Default None
Parameters dsap-value — The 8-bit dsap match criteria value in hexadecimal.
dsap-mask — This is optional and can be used when specifying a range of dsap values to use as
Quality of Service Guide
Format Style
Hexadecimal
Binary
To select a range from 4 up to 7 specify p-value of 4 and a mask of 0b100 for value and mask.
Default 7 (decimal) (exact match)
Values
1 to 7 (decimal)
Values
0x00 to 0xFF (hex)
the match criteria.
This 8 bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
Default FF (hex) (exact match)
Values 0x00 to 0xFF (hex)
Service Egress and Ingress QoS Policies
Format Syntax
0xH
0bBBB
Format Syntax
DDD
0xHH
0bBBBBBBBB
Example
0x4
0b100
Example
240
0xF0
0b11110000
315