Network QoS Policy Command Reference
dscp-value — Specifies a value when this packet egresses the respective egress policy should
dscp-name — Specifies the DSCP name.
dot1p-priority — Specifies the Dot1P priority.
dot1p-app-name — Specifies the Dot1P application name.
dscp
Syntax
dscp dscp-name fc fc-name
no dscp dscp-name
Context
config>router>sgt-qos
config>service>vprn>sgt-qos
Description
This command creates a mapping between the DiffServ Code Point (DSCP) of the self generated
traffic and the forwarding class.
Self generated traffic that matches the specified DSCP will be assigned to the corresponding
forwarding class. Multiple commands can be entered to define the association of some or all sixty-four
DiffServ code points to the forwarding class.
All dscp name that defines a dscp value must be explicitly defined
132
bgp, cflowd, dhcp, diameter, dns, ftp, gtp, icmp, igmp, igmp-
reporter, l2tp, ldp, mld, msdp, ndis, ntp, ospf, pcep, pim, ptp,
radius, rip, rsvp, sflow, snmp, snmp-notification, srrp, ssh, syslog,
tacplus, telnet, tftp, traceroute, vrrp
Values
The following values apply to the 7450 ESS:
bgp, dhcp, dns, ftp, icmp, igmp, ldp, mld, ntp, ospf, radius, rsvp,
rip, ssh, snmp, snmp-notification, syslog, telnet, tftp, traceroute,
tacplus, vrrp
provide the mapping for the DSCP value to either LSP-EXP bits or IEEE 802.1p (Dot1P) bits
as appropriate otherwise the default mapping applies.
Values
0 to 63
Values
none, be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3,
cs4, cs5, nc1, nc2, af11, af12, af13, af21, af22, af23, af31, af32,
af33, af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21, cp23,
cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43,
cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57,
cp58, cp59, cp60, cp61, cp62, cp63
Values
0 to 7
Values
The following values apply to the 7750 SR and 7950 XRS:
arp, isis, pppoe
Values
The following values apply to the 7450 ESS
arp, isis
Quality of Service Guide