Alcatel-Lucent 7450 Quality Of Service Manual page 582

QoS Scheduler Policy Command Reference
Parameters scheduler-name — The name of a scheduler configured in the config>qos>scheduler-policy
association — Display the associations related to the specified scheduler name.
sap-ingress policy-id — Specify the SAP ingress QoS policy information.
sap-egress policy-id — Specify the SAP egress QoS policy information.
Customer Scheduler-Policy Output
Output
The following table describes the customer scheduler hierarchy fields.
582
context.
Table 32: Show QoS Scheduler-Policy Output Fields
Label
Policy-Name
Description
Tier
Scheduler
Lvl/Wt
Cir Lvl/Wt
PIR
CIR
Parent
Service-Id
Customer-Id
SAP
Multi Service Site
Description
Specifies the scheduler policy name.
A text string that helps identify the policy's context in the configuration
file.
Specifies the level of hierarchy that a group of schedulers are associated
with.
Specifies the scheduler name.
Specifies the priority level of the scheduler when compared to other
child schedulers and queues vying for bandwidth on the parent
schedulers during the 'above CIR' distribution phase of bandwidth
allocation.
Weight defines the relative weight of this scheduler in comparison to
other child schedulers and queues at the same level.
Specifies the level of hierarchy when compared to other schedulers and
queues when vying for bandwidth on the parent scheduler.
Weight defines the relative weight of this queue in comparison to other
child schedulers and queues while vying for bandwidth on the parent
scheduler.
Specifies the PIR rate.
Specifies the CIR rate.
Specifies the parent scheduler that governs the available bandwidth
given the queue aside from the queue's PIR setting.
The ID that uniquely identifies the policy.
The ID that uniquely identifies the customer.
Specifies the Service Access Point (SAP) within the service where the
policy is applied.
Specifies the multi-service site name.
Quality of Service Guide