Service Egress QoS Policy
To create a service egress policy, you must define the following:
After the policy is created, the policy's behavior can be defined:
The following displays an egress QoS policy configuration:
A:ALA-7>config>qos# info
#------------------------------------------
echo "QoS Policy Configuration"
#------------------------------------------
...
...
#------------------------------------------
Quality of Service Guide
•
Percent-Rate Support
•
Service Egress QoS Policy
•
Service Ingress QoS Policy
•
A new policy ID value. The system will not dynamically assign a value.
•
Specify the scope. A QoS policy must be defined as having either an exclusive scope
for one-time use, or a template scope which enables its use with multiple SAPs.
•
Include a description. The description provides a brief overview of policy features.
•
Specify the forwarding class. The forwarding class name or names associated with
the egress queue. The egress queue for the service traffic is selected based on the
forwarding classes that are associated with the queue.
•
A new queue ID value. The system will not dynamically assign a value.
•
Define queue parameters. Queues support explicit and auto-expedite hardware queue
scheduling, and parent virtual scheduler definition.
sap-egress 105 create
description "SAP egress policy"
queue 1 create
exit
queue 2 create
exit
queue 3 expedite create
parent test1
exit
fc af create
queue 1
exit
fc ef create
queue 2
exit
exit
Service Egress and Ingress QoS Policies
191