Basic Configurations
The following output displays XMA or MDA network ingress queue policy reverted to the
default policy.
A:ALA-7>config>card>mda# info
----------------------------------------------
----------------------------------------------
A:ALA-7>config>card>mda#
Ethernet Ports
Use the following CLI syntax to apply a network queue policy to an Ethernet port.
CLI Syntax:
The following output displays the port configuration.
A:ALA-49>config>port# info
----------------------------------------------
152
mda-type m60-10/100eth-tx
network
ingress
pool default
resv-cbs sum
slope-policy "default"
exit
queue-policy "default"
exit
egress
pool default
resv-cbs sum
slope-policy "default"
exit
exit
exit
access
ingress
pool default
resv-cbs sum
slope-policy "default"
exit
exit
egress
pool default
resv-cbs sum
slope-policy "default"
exit
exit
exit
no shutdown
config>port#
ethernet
network
queue-policy name
Quality of Service Guide