Show Commands - Alcatel-Lucent 7450 Quality Of Service Manual

Parameters
sir value — Sustained Information Rate (including cell overhead) in kilobits per second.
pir value — Peak Information Rate (including cell overhead) in kilobits per second.
mir value — Minimum Desired Information Rate (including cell overhead) in kilobits per second.
mbs value — Maximum Burst Size in cells
cdvt cdvt-val — The Cell Delay Variation Tolerance (CDVT), in microseconds.

Show Commands

The command outputs in the following section are examples only; actual displays depend on
supported functionality and user configuration.
Quality of Service Guide
Table 55: ATM Traffic Parameter Defaults
Service Category
CBR:
PIR
rt-VBR and nrt-VBR
PIR
SCR
MBS
UBR (by default UBR is without MIR)
PIR
MIR
Values 0 to 4294967295
Values 0 to 4294967295
Values 0 to 4294967295
Values 0 to 4294967295
Default Depending upon a given service category:
CBR/RT-VBR/NRT-VBR
Values
0 to 4294967295
QoS ATM Traffic Descriptor Profiles
Traffic Parameter Defaults
0
0
0
32
0
0
250
709