CLI Syntax:
Default Slope Policy Values
The default access ingress and egress policies are identified as policy-id 1. The default
policies cannot be edited or deleted. The following displays default policy parameters:
The following output displays the default configuration:
Quality of Service Guide
config>mcast-mgmt>bw-plcy> mcast-pool percent-of-total
<percent-of-buffers> resv-cbs <percent-of-pool> slope-
policy <policy-name>
Table 41: Slope Policy Defaults
Field
description
high-slope
shutdown
start-avg
max-avg
max-prob
low-slope
shutdown
start-avg
max-avg
max-prob
exceed-slope
shutdown
start-avg
max-avg
max-prob
time-average-factor
Default
"Default slope policy"
shutdown
70
90
80
shutdown
50
75
80
shutdown
30
55
80
7
Slope QoS Policies
625