Alcatel-Lucent 7450 Quality Of Service Manual page 312

Service SAP QoS Policy Command Reference
The no form of this command removes the match criterion and matches all packets regardless of
whether they are fragmented or not.
Default no fragment
Parameters true — Specifies to match on all fragmented IPv6 packets. A match will occur for all packets that
false — Specifies to match on all non-fragmented IP packets. Non-fragmented IPv6 packets are
first-only — Matches if a packet is an initial fragment of the fragmented IPv6 packet.
non-first-only — Matches if a packet is a non-initial fragment of the fragmented IPv6 packet.
src-ip
Syntax src-ip {ip-address/mask | ip-address ipv4-address-mask | ip-prefix-list prefix-list-name}
src-ip {ipv6-address/prefix-length | ipv6-address ipv6-address-mask}
no src-ip
Context config>qos>sap-ingress>ip-criteria>entry>match
config>qos>sap-egress>ip-criteria>entry>match
config>qos>sap-ingress>ipv6-criteria>entry>match
config>qos>sap-egress>ipv6-criteria>entry>match
Description
This command configures a source IPv4 or IPv6 address range to be used as an SAP QoS policy match
criterion.
To match on the source IPv4 or IPv6 address, specify the address and its associated mask, e.g. 10.1.0.0/
16. The conventional notation of 10.1.0.0 255.255.0.0 can also be used for IPv4.
The no form of the command removes the source IPv4 or IPv6 address match criterion.
Default No source IP match criterion.
Parameters
ip-address — Specifies the source IPv4 address specified in dotted decimal notation.
mask — Specifies the length in bits of the subnet mask.
ipv4-address-mask — Specifies the subnet mask in dotted decimal notation.
ip-prefix-list — creates a list of IPv4 prefixes for match criteria in QoS policies. An ip-prefix-list
prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
312
contain an IPv6 Fragmentation Extension Header.
packets that do not contain an IPv6 Fragmentation Extension Header.
Values ip-address: a.b.c.d
Values 1 to 32
Values a.b.c.d (dotted quad equivalent of mask length)
must contain only IPv4 address prefixes.
characters are used, the string must be enclosed within double quotes.
Quality of Service Guide