Scheduler Policy Commands - Alcatel-Lucent 7450 Quality Of Service Manual

If overwrite is not specified, an error will occur if the destination policy exists.
Parameters scheduler-policy src-name dst-name — Indicates that the source policy and the destination
port-scheduler-policy src-name dst-name — Indicates that the source policy and the destination
overwrite — Forces the destination policy name to be copied as specified. When forced,

Scheduler Policy Commands

scheduler-policy
Syntax [no] scheduler-policy scheduler-policy-name
Context config>qos
Description Each scheduler policy is divided up into groups of schedulers based on the tier each scheduler is
created under. A tier is used to give structure to the schedulers within a policy and define rules for
parent scheduler associations.
The scheduler-policy command creates a scheduler policy or allows you to edit an existing policy.The
policy defines the hierarchy and operating parameters for virtual schedulers. Merely creating a policy
does not create the schedulers; it only provides a template for the schedulers to be created when the
policy is associated with a SAP or multi-service site.
Each scheduler policy must have a unique name within the context of the system. Modifications made
to an existing policy are executed on all schedulers that use the policy. This can cause queues or
schedulers to become orphaned (invalid parent association) and adversely affect the ability of the
system to enforce service level agreements (SLAs).
If a scheduler-policy-name does not exist, it is assumed that an attempt is being made to create a new
policy. The success of the command execution is dependent on the following:
Quality of Service Guide
policy are scheduler policy. Specify the source policy that the copy command will attempt to
copy from and specify the destination policy to which the command will copy a duplicate of
the policy.
policy are port scheduler policy IDs. Specify the source policy that the copy command will
attempt to copy from and specify the destination policy name to which the command will
copy a duplicate of the policy.
everything in the existing destination policy will be completely overwritten with the contents
of the source policy.
1. The maximum number of scheduler policies has not been configured.
2. The provided scheduler-policy-name is valid.
3. The create keyword is entered with the command if the system is configured to require it
(enabled in the environment create command).
QoS Scheduler Policies
565