Sonet/Sdh Ports; Default Network Queue Policy Values - Alcatel-Lucent 7450 Quality Of Service Manual

----------------------------------------------
A:ALA-49>config>port#

SONET/SDH Ports

Use the following CLI syntax to apply a network queue policy to a SONET/SDH port:
CLI Syntax:
The following output displays the port configuration.
A:ALA-48>config>port# info
----------------------------------------------
----------------------------------------------
A:ALA-48>config>port#

Default Network Queue Policy Values

The default network queue policies are identified as policy-id default. The default policies
cannot be modified or deleted.
Quality of Service Guide
ethernet
network
queue-policy "nq1"
exit
exit
no shutdown
config>port#
sonet-sdh
path path
network
description "OC-12 SONET/SDH"
sonet-sdh
path sts3
network
queue-policy "nq1"
exit
no shutdown
exit
exit
no shutdown
Table 25: Network Queue Policy Defaults
Field
description
queue-policy name
Table 25 displays default policy parameters.
Default
"Default network queue QoS policy."
Network Queue QoS Policies
153